Feb 22, 2007 - 11:15 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
so I get my car back from the body shop and first thing I notice is the clutch pedal feels different. heres what happens...
so when I'm at a stop light I keep it in gear with my foot on the clutch. after a few seconds - revs drop 200 or so rpm - can't pull it out of gear - let off the brake it moves forward like an auto - when I give it gas and try to start normally the pedal stays on the floor and comes up really slowly more specifics: - does not happen when the clutch is in and its NOT in gear - driving normally it feels fine, a little soft at the top sometimes but not all the time - if I pump the clutch pedal it starts to feel normal again (not soft at the top) - last two times I drove in reverse I couldn't get it out of reverse to go forward, had to turn the car off and start it again - checked the fluid and it looks fine, no bubbles or anything abnormal only thing I could think of was that its needs to be bled but it still seems a little weird. how does air get into the fluid lines without touching them (I assume the body shop didn't touch them since they were just supposed to paint the car). if bleeding doesn't do the trick what else should I check? what else could it be? -------------------- |
![]() |
Feb 24, 2007 - 12:15 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
if theres no air in the system and no external leak, it could be an INTERNAL leak. the cup seals could be passing fluid and not holding pressure on the correct side.
-------------------- |
hurley97 clutch pedal problem Feb 22, 2007 - 11:15 PM
97lestyousay Is the slave cylinder leaking? Feb 22, 2007 - 11:20 PM
hurley97 you know... I'm not sure. it was raining so I ... Feb 22, 2007 - 11:25 PM
97lestyousay The reason it does it in gear is because its relea... Feb 22, 2007 - 11:36 PM
hurley97 yeah, it was just bled like 7 months ago when it w... Feb 22, 2007 - 11:45 PM
vsideboy aye, mine is starting to do it.
If you hold it in... Feb 23, 2007 - 3:02 AM
hurley97 no visible leaks from the clutch lines, slave, or ... Feb 23, 2007 - 11:10 PM
bindertch It sounds like the seals in your master cylinder h... Feb 24, 2007 - 12:41 AM
97lestyousay QUOTE(bindertch @ Feb 23, 2007 - 9:4... Feb 24, 2007 - 1:22 AM
Bitter QUOTE(Bitter @ Feb 24, 2007 - 12:15 ... Feb 24, 2007 - 8:50 AM
presure2 its either the slave or the master cylinder, steff... Feb 24, 2007 - 10:15 AM
hurley97 so I was going to order a slave cylinder from work... Feb 25, 2007 - 10:16 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 23rd, 2025 - 11:15 AM |