4AFTE / 7AFTE owner, need your assist, Something wrong with my setup. Options

[normality78]

Alright, i've been pm some members here who is having either 4AFTE / 7AFTE setup here to find out what is their power numbers they able to achieve. As i suspected there is a some flaw on my setup which i cant hit as impressive power figure as those bros here even almost similar setup.

Im trying to find out what wrong with my setup? On the dyno day, the only problem found was there was a leaking at the joint session between turbo manifold flange to turbo flange. But im skeptical that problem will cause me lost alot of power. Pls correct me if im wrong.

now im thinking to fully rebuilt my turbokit or i can do something on it. Thought of changing turbo and having some turbo choice in my head but i'll start another thread on that.

All negative and positive feedback/opinion/suggestion welcome.

Below is my recent dyno result.


Current setup was:
custom made turbo manifold
IHI RHB52
2.5" downpipe
2.2" from downpipe to dummy CAT
2" frm DUmmy CAT till straight flow muffler
2.5" s/steel pipe to IC
2.5" s/steel pipping frm IC thn having reducer to 2" s/steel pipping to TB
some ebay IC (590 x 230 x 67)


This is my turbo manifold.
http://img250.imageshack.us/my.php?image=dsc003018us.jpg

This is my downpipe
http://img439.imageshack.us/my.php?image=dsc003970xl.jpg

This is my IC
http://img46.imageshack.us/my.php?image=dsc00310ba3.jpg

[normality78]

i did lost some faith on this turbo now and also the manifold. so im looking to change it.

next im going to replicated exact same unit as picture show (this belong to my fren)




Reason why i choose to do top mount coz im plan to use Garrett T28 and i think its not going to have enough space should i place it below. most likely it will block my oil filter. Another reason is the manifold runner looks simple and short enough hence i believe it will improve my turbo respond not to mentioned T28 ball bearing turbo.

what you guys think? By the way, do u think my IC is abit too big?