My 5sfTe project, Photo's are big 56k warning... sorry Options

[1bwilson]

So since I really dont have a set 5sfte post just my "need a little help" post, I figured Id make one aswell.

What I have:

Built 5sfe:
CP pistons - In
3sgte rods - In
crank milled to fit the rods - In
PP'd head - In
Metal head gasket - In
ARP head studs - In

Turbo parts:
3s Manifold, Turbo, Oil lines, Coolent lines - In, In, In, In
DG custom IC piping - In
Ebay intercooler (cant remember the size) - In
Injectors 460cc - In
Walbro fuel pump - In
Greddy Type S bov - In
KO Racing DP - In
DG custom Mid pipe - In
SPark plugs gapped properly - In

Other stuff:
Oil filter - Done
Batt relocated to trunk - In
Devils own WI kit - In
Turbo xs manual boost controller - In
Emanage ultimate - here, waiting on the harness.
Boost gauge - In
EGT Gauge - In
AEM UEGO - In

Im rather suprized I havent had any major set backs yet (knock on wood!). Ive taken my time and set a daily goal up for myself and tried to stick with it. Even when I got ahead I cleaned up and planned the next day out. This way Ive been 80% ahead of myself on ordering small things like nuts and bolts that I missed or didnt have from used parts. Would be 100% but some how the tech's at my local toyota cant order the correct part even if I give them the part #'s.

This post has been edited by 1bwilson: Oct 3, 2008 - 10:37 PM

[1bwilson]

Okay were up and running. With the blessing of Manny I went back to the 315's for a little while. Running the 460's I was just to rich and wanted to get some drive time in before the 460's and programer went in. Im not boosting anything then a slight tap on the gas for a max of 20-30 yards. I just want to be sure everything is in running order before I make a app with a shop for tuning and dyno time. I also have some old gas I have to burn threw before then. I can feel the turbo spool up and want to pull HARD even at stock boost. I cant wait to get everything in and turn the boost up more and see how hard it pulls.