Apr 16, 2007 - 4:08 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
Folks look what I have found after lifting my car:
![]() main leak point was place where is transition connected to half shaft (some joint or something): ![]() for better orientation once again with comments: ![]() here another picture from different angle: ![]() what do you think it should be? I have some theories: - bad balance gear (differential gearing) or it's bearing - bad axle joint... it self or some part like some seal or ring cup... I don't know - bad half shaft (half axle) what do you thing? anyone seen this before? Wanna more pics? thanks for any advice... p.s.: sorry for multiple names of parts, I'm not sure which one is right (or better) for that... edit: also may help if you tell me which part should be bad (just in case I will not know what is that or how it is called RH drive shaft EPC pic: ![]() front axle holding EPC pic:
This post has been edited by malpaso: Apr 16, 2007 - 6:53 AM -------------------- No more replicas... This is evolution... This is SS-four :)
![]() ________[Featured Celica of 6gc.net @ 2010]_________ |
![]() |
Apr 24, 2007 - 11:03 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
You showed pictures of the passenger side axle and said it was leaking from that side, yet you say a snap ring fixed the leak which the passenger side axle shouldn't have/need... Did it end up being the driver's side that was leaking?
-------------------- ![]() Project ST204.5 99.88946% complete... |
Apr 24, 2007 - 12:07 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
QUOTE(WannabeGT4 @ Apr 24, 2007 - 6:03 PM) [snapback]549991[/snapback] You showed pictures of the passenger side axle and said it was leaking from that side, yet you say a snap ring fixed the leak which the passenger side axle shouldn't have/need... Did it end up being the driver's side that was leaking? Yes it was snap ring from passenger side. There really is also mandatory snap ring (you can find it in EPC as well)
-------------------- No more replicas... This is evolution... This is SS-four :)
![]() ________[Featured Celica of 6gc.net @ 2010]_________ |
Dec 14, 2007 - 4:33 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
QUOTE(malpaso @ Apr 24, 2007 - 7:07 AM) [snapback]550040[/snapback] QUOTE(WannabeGT4 @ Apr 24, 2007 - 6:03 PM) [snapback]549991[/snapback] You showed pictures of the passenger side axle and said it was leaking from that side, yet you say a snap ring fixed the leak which the passenger side axle shouldn't have/need... Did it end up being the driver's side that was leaking? Yes it was snap ring from passenger side. There really is also mandatory snap ring (you can find it in EPC as well) ![]() hey do you know the number printed on the oil seal?? -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
![]() |
malpaso oil leak from tranny... need your opinion. Apr 16, 2007 - 4:08 AM
Hanyo seems like the snap ring inside the axel is missin... Apr 16, 2007 - 4:27 AM
doGGy QUOTE(Hanyo @ Apr 16, 2007 - 2:27 AM... Apr 16, 2007 - 11:26 AM
rjbibeau take a hole saw and grind down ther teeth and use ... Apr 16, 2007 - 12:29 PM
malpaso could you confirm which parts should I order?
- 4... Apr 16, 2007 - 2:01 PM
WannabeGT4 The passenger side axle doesn't have a snap ri... Apr 16, 2007 - 2:16 PM
malpaso QUOTE(WannabeGT4 @ Apr 16, 2007 - 9... Apr 17, 2007 - 12:04 AM
malpaso RESULTS:
only that part with number 43410N (ring,... Apr 24, 2007 - 8:33 AM
purplegt4 My car is leaking on the driver's side, so Jus... Dec 12, 2007 - 10:58 PM
deliriouzgtfour mine keeps on leaking...seal was replaced, but not... Dec 13, 2007 - 3:40 AM![]() ![]() |
| Lo-Fi Version | Time is now: March 25th, 2026 - 12:27 PM |