6G Celicas Forums

Welcome Guest ( Log In | Register )

> Automatic doesn't change at higher speeds
post Jan 23, 2008 - 5:57 AM
+Quote Post
spizz

Enthusiast

Joined Jan 23, '08
Currently Offline

Reputation: 0 (0%)




Hi.

I've just brought a 94 GT, UK import. This is my second Celica but this is an automatic.

Anyway, I opened her up last night but in overdrive it would reach about 90mph and then it felt like it was searching for a higher gear, basically it was revving highly for a couple of seconds and then the rev's would drop, this just continued whilst I was trying to accelerate but it would go no faster than 90mph.

I tried it with the overdrive off this morning and again it accelerated up to 85mph but again didn't change. The revs were 5500 at this point.

At lower speeds it changes gear fine.

Can anyone shed any light on this for me please.

Thanks.
 
Start new topic
Replies
post Jan 23, 2008 - 7:12 AM
+Quote Post
hurley97



Enthusiast
*****
Joined Mar 3, '04
From Portsmouth, RI
Currently Offline

Reputation: 33 (100%)




with overdrive on you're working with 4 gears, with it off you're basically using only 3 gears. the ECT determines where to shift by your throttle percentage, if you're flooring it the gears will change later in the RPM band, if you're just driving around the city it'll change where it normally does.

it's weird but the 6th gen auto trans will go right up until about 90mph before it seems to just stop, it will keep going after that but very very slowly.

in summary, automatics are weird, just swap to a standard wink.gif


--------------------
7A-FTE: It's not about the money. Our Beams Swap.

I <3 Dustin---07/16/06

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 1st, 2025 - 1:49 PM