Shocks Doubt! AT200/ST204 Vs. ST202 Options

[Titiko]

Good Morning Guys!

I am from Venezuela and i get a 6th gen celica but here in Venezuela Toyota only imported the model: ST202 2.0 liters engine code: 3S-FE. since i have read many posts you only have in US the models: AT200/ST204.

This is my situation: i nee to change the shocks (front/rear) but i really dont know if the shocks for AT200/ST204 could be used on my ST202. Does anyone know if these parts meet each other? Could i buy these shocks to be installed in my ST202? could it be fit?

For example: these are the p/n for AT200&ST204:
KYB AGX: 334378, 334379, 334125, 334126.

Monroe: 71557, 71558, 71559, 71560.

Aristides

[Titiko]

Yes, this is a 3F-FE! The KYB shown models are AGX GR2

Give me a chance while i get the Toyota p/n from my car, but how will i get the p/n from the others (AT200, ST204)? someone who get those model could help me?

[malpaso]

Yes, this is a 3F-FE! The KYB shown models are AGX GR2

Give me a chance while i get the Toyota p/n from my car, but how will i get the p/n from the others (AT200, ST204)? someone who get those model could help me?

If you have 3SFE engine you have JDM SS-I model. And all models below has according to Toyota parts catalog the same suspension (shocks):

ST202 (JDM SS-I)
ST203 (JDM SS-I)
ST202 (JDM Convertible)
ST203 (JDM Convertible)
AT200 (European ST)
AT200 (US/CND ST)
ST204 (US/CND GT)
ST204 (US Convertible)

so everything what fit for US models will for 100% fit for you as well. numbers talks

note: and according to experience of other people I know all mcperson shocks used for 6gc are compatible each other. See last post of this topic for more...