5sfte timing setting Options

[1994toyotaracer]

hi guys i have an apexi neo for my fuel manage and was wondering what the ignition timing should be set at my car doesnt seem to want to go past 5500rpms

thanks

[scooterman]

i checked the stock timing map on a 96 camry the other day. if you boost a 5s on the stock timing 10* base. you will be fine in the upper boost range over 10 psi but might be slightly advanced under low boost.

96 camry was ~~ 17-25 from 80-100kpa, 30-45 from 40-70kpa, 10-25 from 20-39kpa all depending on rpm too


this said some poeple recommend an msd btm. I belive in my opinion that the btm will pull too much timing when above 8-9 psi of boost. below that it should help, becuase the timing map would be much more advanced in that range.

This post has been edited by scooterman: Jun 12, 2008 - 9:58 PM