Sep 4, 2008 - 5:05 AM
|
|
|
Enthusiast Joined Apr 5, '06 From PITTSBURGH, PA Currently Offline Reputation: 0 (0%) |
I have a problem now, This use to be a small leak but now it is a full blown 5 quart a day engine draining monster of a problem.
I have located the source of the problem I would like to see what can be done about the issue. Basically -I removed the protective plastics from the passenger side of the engine. -Cleaned the area of Oil - Located the location of the leak I originally though that the problem was with the oil pan. So I tightened a couple of the bolts and it still has the same leak. The leak is a fast leak from the rear of the engine above the oil drain bolt in the oil pan. I have enclosed a picture of where the leak is coming from. (this picture is of a 5SFE engine from a mr2 found it on the internet just to show where this leak is coming from) What do you think I tried to tighten the two bolts and they seemed loose but did not want to put too much pressure on them because the engine was still kinda hot. The arrow on this picture is where the oil is spewing from I will attempt to get better pictures with my camera today If I can not get this issue resolved. Any suggestions or help would be great.. ![]() |
![]() |
Sep 4, 2008 - 9:46 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
Rear main... Probably several hundred bucks... i guess... IDFK... i've never paid a mechanic to fix one before
If it's an oil sending unit, then yeah, it'd be fairly cheap. That's not too much work... But if you're taking it to the mech, then just make sure you know what all he's doing. -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! Damn D-Man - most impressive. D-Man's post should be a sticky LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
Celi94bk Oil leak rear passenger side of 5sfe -- picture attached Sep 4, 2008 - 5:05 AM
D-Man The oil is literally coming out of that bolt hole?... Sep 4, 2008 - 8:07 AM
Celi94bk well I got my camera out after messing around with... Sep 4, 2008 - 8:58 AM
D-Man QUOTE (Celi94bk @ Sep 4, 2008 - 8:58... Sep 4, 2008 - 9:31 AM
GT4KNG i would give the engine a good clean and get all t... Sep 4, 2008 - 9:37 AM
Celi94bk I did that before I got my camera out.... smart hu... Sep 4, 2008 - 9:39 AM
Celi94bk Hey is a pretty good mech, never had a problem and... Sep 4, 2008 - 9:51 AM
hurley97 Your rear main seal is not on that side of the eng... Sep 4, 2008 - 6:58 PM
Celi94bk how hard are the cam or crank seal to replace?
lo... Sep 4, 2008 - 7:01 PM
hurley97 Not much more than a timing belt job. And you shou... Sep 4, 2008 - 8:39 PM
freak1c Just had my front cam seal, crank seal, oil pump s... Sep 5, 2008 - 12:57 AM
Celi94bk Thanks for all the comments I will find out today ... Sep 5, 2008 - 4:24 AM
Celi94bk Well I'm going to get a new car, Turns out tha... Sep 9, 2008 - 9:32 AM
D-Man Craigslist...
Or you can part it! I need a ... Sep 9, 2008 - 9:38 AM
Agent21 Cam seal is an easy fix but K-sarah I guess. You w... Sep 9, 2008 - 10:21 AM
rjbibeau easy fix, no more than a six pack worth of time. Sep 9, 2008 - 11:27 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 10:44 AM |