![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Sep 29, '05 From Rochester, Massachusetts Currently Offline Reputation: 2 (100%) ![]() |
So Ive been having issues with my idle for quite some time now. For a while it was bouncing consistently between 1800rpm and 2200rpm. so I swapped throttle bodies (i couldnt get the iac out). so problem solved! its no longer bouncing, now it is stuck at 3000rpm.
So I pulled off that throttle body and because I had the new screws I forced the screws off my original tb, cleaned it and put it back together. same problem. I dont know what to do anymore, I'm stumped, any ideas are very much welcome. -------------------- ![]() The question is not how far. The question is, do you possess the constitution, the depth of faith, to go as far as is needed? |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Sep 29, '05 From Rochester, Massachusetts Currently Offline Reputation: 2 (100%) ![]() |
i actually thought of that, and I did it, with the same result.
Now when its "idling" if i give it a little gas, it will stick at whatever rpms I put it to, then drops. -------------------- ![]() The question is not how far. The question is, do you possess the constitution, the depth of faith, to go as far as is needed? |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
i actually thought of that, and I did it, with the same result. Now when its "idling" if i give it a little gas, it will stick at whatever rpms I put it to, then drops. have you tried the BGB tests for the IAC? you can get them in the sticky in the general dissucsion sticky at the resource site. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: July 22nd, 2025 - 1:06 PM |