![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Sep 29, '05 From Rochester, Massachusetts Currently Offline Reputation: 2 (100%) ![]() |
So Ive been having issues with my idle for quite some time now. For a while it was bouncing consistently between 1800rpm and 2200rpm. so I swapped throttle bodies (i couldnt get the iac out). so problem solved! its no longer bouncing, now it is stuck at 3000rpm.
So I pulled off that throttle body and because I had the new screws I forced the screws off my original tb, cleaned it and put it back together. same problem. I dont know what to do anymore, I'm stumped, any ideas are very much welcome. -------------------- ![]() The question is not how far. The question is, do you possess the constitution, the depth of faith, to go as far as is needed? |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Sep 29, '05 From Rochester, Massachusetts Currently Offline Reputation: 2 (100%) ![]() |
so ive gone through everything I can think of. Anyone have anything for me?
-------------------- ![]() The question is not how far. The question is, do you possess the constitution, the depth of faith, to go as far as is needed? |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) ![]() |
so ive gone through everything I can think of. Anyone have anything for me? Just trying to help I had a post a ways back. My idle was fluctuating and I found out it was the airbox sensor wire. It seems to be where the wire for it meets the harness right next to airbox. I tiestrapped it firmly and my idle works perfect now. But when I would just barely move the harness or the engine would shake the engine would make a strange sucking sound and idle would jump. I still have to go into the harness but I don't want to mess since it works perfect now. Edit what I was trying to say if you wiggle the wire where it meets the harness and the idle changes it can be the problem that I have ,if you wiggle the harness and nothing happens then your harness and wire is fine. Check it out. This post has been edited by xrav22: Jul 2, 2009 - 7:50 PM |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 2:56 PM |