![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Feb 10, '09 From pa Currently Offline Reputation: 0 (0%) ![]() |
i am not completly new to imports but i am new to celicas. right now my car is stock exept for a cold air intake. on other cars the first thing i did was upgrade the distributor, plugs, wires, injectors.etc so my question is what do i do first, where do i start
This post has been edited by babi_boi: Feb 10, 2009 - 10:10 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Feb 10, '09 From pa Currently Offline Reputation: 0 (0%) ![]() |
yes i know sorry. after i posted the last one i started to read the forced induction.
now i haven't read all of them just some of them but even if i get the 3s swapp i still want to ugrade the motor. it was stated earlier that the 3s swapp should take me down to about 14 secs. in the 1/4 mile. so if i rebuild the 3s swapp from bottom up i should get even a better time right -------------------- BABI BOI
|
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jul 14, '08 From St. Louis Currently Offline Reputation: 2 (100%) ![]() |
before doing anything, set some goals that you want to reach. then it gives you a direction you can head. and then start researching on how you can get there.
your goals can be anything from 'i want to make it a little nicer to drive' all the way to 'i want a 500hp, 10 second quartermile monster' naturally, some goals will cost more than others to reach. and some might not be possible at all. so take a realistic look at what you want and see who else has done similar things and read what has been done before. it'll give you a good launching point. if you're just wanting a 14 second car, first re-read this thread and follow their advice. then you can plan out a course to take. -------------------- '99 Celica GT - Sold
'11 Mazdaspeed3 |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 4:07 PM |