![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%) ![]() |
sO i GOT MY METH KIT IN AND i THROW A CODE 52/ KNOCK SENSOR. So I am waiting on a ats gm knock sensor kit. So mods as of today.
ct20-b full 3inch exhaust 3 inch dp twos r us mbc cool mist water/ meth kit ats tb inlet air intake light weight flywheel ats knock sensor kit kyb struts all the way around ( just installed the other 2 and the car sits very high dont even look lowered hope it settles.) and springs lowered 2 inches stage 2 clutch aem afr wide band motor mount inserts ats bored fuel pressure regulator So I bought a emanage blue and a blitz access ecu. My question is which would be better for my setup. As far as tuning the emanage I can get that done. Out of a emanage blue and a blitz ecu with boost at max 18psi which would you run? Tune for emanage is $120 an 180 for pnp harness $300 total. an if I go with the blitz ecu I have to repin it or get a adaptor harness from dr tweak for $170. So the ecu would save me money but if the emanage would make more power would it be worth the more more I would have to spend? Also sold mt rims and new ones should be here tommorow I will post pics. I am going to run a sort of stagared tire set up. Up front will be 225/45/17 and rear 235/40/17. I want a wider tire in the rear. What do you guys think? This post has been edited by mk7celica: Oct 31, 2009 - 5:35 PM |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%) ![]() |
Yea I figured out what wires to repin but I can not get them out the plug. I dont want to mess the wires up pulling on them. Josh is going to make me pnp adaptor harness for a 1991 ecu to 1993. This way I can always get a 1991-1992- mr2 ems and just plug it right in.
As far as tuning its a friend. All he tunes is emanage and cheaper methods of tuning. He has a 500+ hp supra he tunes many of his friends cars far cheaper. He has tuned mr2 turbos with emanage blue so I trust he knows what he is doing. I am going to order the adaptor harness and then go to the dyno. Then go from there. |
![]() ![]() |
Lo-Fi Version | Time is now: September 21st, 2025 - 3:03 AM |