wrx/sti top mount intercooler, do you think it would fit? Options

[freddy121389]

If i were to buy a top mount intercooler that is usually ment for the sti/wrx, do you think it would fit in the engine bay of a 5sfe? I'm trying to get a list of what I would need for parts for my car once I do turbo and a top mount just sounds like a unique way to cool down the air before the throttle body. I'm only looking to turbo the car to 8psi and considering since it's an automatic transmission I'll be adding a transmission cooler on the car and won't have too much room for a front mount. Also I would be custom making a hood scoop that would fit over the intercooler as well. It won't be for a while but I have had this dream for a really long time. I just want your opinions. Pro's and Con's of this. I figure since the burien turbo kit that was made didn't even run an intercooler why not throw on a top mount in.

[95CelicaST]

I suppose it could fit, but there are mounts on the side of the WRX top mount that bolt to brackets that are bolted to the engine for support. You would have a hard time fabricating something like that. Then, of course you would need to fabricate a custom Y pipe, because your turbo won't sit up against the passenger side firewall like a subaru. Then you would need to make some crazy adapter to fit it to the throttle body, because that REALLY won't line up.

So yes, it could be done, but would be a waste of time and money. Most subaru guys replace it with a front mount because it is very prone to heat soak.