 Head cc for 7A-FE head, CP needs this info to build me my forged pistons |
 Dec 26, 2009 - 10:53 PM
|
 
|
|
Enthusiast  Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%)  |
Hey guys, I went to the PRI in Florida and ordered my pistons from CP, but they need the deck height and the combustion chamber cc of the 7A-FE head. I gave them the rest of the info they needed, like valve size, bore, etc., and they're waiting on these details. I have looked everywhere online and I haven't found anything, and I don't have time to pull the head out and use the syringe method to find out the size of the combustion chamber. Anyone has that info? This is holding me back. If I can't find it, I'll ask them if they would accept a stock piston so they can measure it and do my pistons. Thanks in advance.
This post has been edited by OOBE: Dec 26, 2009 - 10:54 PM -------------------- Past - 7A-FTE: Will never forget you
Present - 3rd Gen 3S-GTE: Swap in progress QUOTE (SinisterSinner @ Dec 19, 2009 - 10:52 AM)  I dont want to even think of turbos, they blow up way too often... |
Posts in this topic
Bitter i've never heard great things about CP...and b... Dec 26, 2009 - 11:30 PM OOBE They don't make pistons for the 7A-FE, brother... Dec 27, 2009 - 2:13 AM Hafkai I measured it some time ago, iirc it was 34cc. Dec 27, 2009 - 4:16 AM Bitter maybe its just every set they've made for the ... Dec 27, 2009 - 12:18 PM
Mstoochn you dont want CP 7a pistons bro, you want 4a pisto... Dec 27, 2009 - 10:08 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 2:08 AM |