Head cc for 7A-FE head, CP needs this info to build me my forged pistons Options

[OOBE]

Hey guys, I went to the PRI in Florida and ordered my pistons from CP, but they need the deck height and the combustion chamber cc of the 7A-FE head. I gave them the rest of the info they needed, like valve size, bore, etc., and they're waiting on these details. I have looked everywhere online and I haven't found anything, and I don't have time to pull the head out and use the syringe method to find out the size of the combustion chamber. Anyone has that info? This is holding me back. If I can't find it, I'll ask them if they would accept a stock piston so they can measure it and do my pistons. Thanks in advance.

This post has been edited by OOBE: Dec 26, 2009 - 10:54 PM

[OOBE]

They don't make pistons for the 7A-FE, brother man. These are custom, not off the shelf, so they need all the info to build them from scratch. Why would they have info from an engine they don't work on? My tuner runs CP in all his cars and a lot of buddies of mine and they haven't had any problems. I have seen the pistons after being run hard. No problems. We have a lot of CP love here.