delete post!, delete Options

[mgnt232]

I dont know if there is one or if someone has one on how to remove the rear bumper on a 94 ST hatch
thanks in advance people-

This post has been edited by mgnt232: Feb 3, 2010 - 8:08 PM

[malpaso]

If I remember right there are:

- plastic clips just below tail lights (you must remove tails to see them) - easy to remove.
- row of about 5 screws from the bottom side (visible) - for 80% rusted as hell and you will need to cut them (nip them off) and re-drill when installing bumper back.
- 2 screws on each side at fender area (you must remove plastic from the trunk to see them) - you probalbly would need some adapter to get there because there is not much space... you will see.

[mgnt232]

Thanks guys ill post up if I have any problems.
the only thing i need to know is which plastic do i take out from the trunk the very back piece or the two side back pieces?
and I wont ahve to take off the inner wheel well? like the front bumper?

If I remember right there are:

- plastic clips just below tail lights (you must remove tails to see them) - easy to remove.
- row of about 5 screws from the bottom side (visible) - for 80% rusted as hell and you will need to cut them (nip them off) and re-drill when installing bumper back.
- 2 screws on each side at fender area (you must remove plastic from the trunk to see them) - you probalbly would need some adapter to get there because there is not much space... you will see.