 WTB: 3s or BEAMs, lol just curious whats out there. |
 Apr 19, 2010 - 8:59 AM
|
 
|
 Enthusiast  Joined Nov 10, '09 From Louisiana Currently Offline Reputation: 5 (100%)  |
So im pretty sure my 2.2 just crapped out on me, and im looking into getting a 2nd or 3rd gen 3s or a BEAMs. And hopefully just using my stock tranny with a upgraded clutch and flywheel. So if anyone could tell me who to talk to about doing the swap and so on please let me know, and i would like to get my hands on one with the uncut wiring harness please. Thanks in advance for any help i get. And im looking to do this asap i have the money saved up to do so, and this is my daily so im looking to get it back on the road as soo as possible, so i figure if im going to have to put another engine in why not put in a 3s.or a BEAMs. AS if someone could point me in the right direction it would be greatly appreciated.
This post has been edited by JuMPiiN: Apr 19, 2010 - 9:03 AM |
 |
Replies
|
Apr 20, 2010 - 8:23 AM
|
|
|
Enthusiast Joined Nov 10, '09 From Louisiana Currently Offline Reputation: 5 (100%) |
Appreciate it, He says he has everything. What all do i exactly need just to make sure he has everything ? And do i just use my 5s transmission axles or do i have to by new ones for this LSD transmission ? Also i just read your write up hurley and batman, you said it was pretty simple about how much did it cost to install, if u dont mind me asking, including belts, pumps, ext. And for the badass exhaust ?
This post has been edited by JuMPiiN: Apr 20, 2010 - 9:09 AM |
|
Apr 20, 2010 - 5:10 PM
|
|
 Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
QUOTE (JuMPiiN @ Apr 20, 2010 - 9:23 AM)  Appreciate it, He says he has everything. What all do i exactly need just to make sure he has everything ? And do i just use my 5s transmission axles or do i have to by new ones for this LSD transmission ? Also i just read your write up hurley and batman, you said it was pretty simple about how much did it cost to install, if u dont mind me asking, including belts, pumps, ext. And for the badass exhaust ? You can just use your GT axles, thats what we have in our Beams. Like ted95 said, we did it ourselves in a friends garage. The exhaust we bought our own muffler and resonator and some piping and had manny put it all together. As far as parts go, I'll have to look up what it all cost. -------------------- |
Posts in this topic
JuMPiiN WTB: 3s or BEAMs Apr 19, 2010 - 8:59 AM
TerBeau QUOTE (JuMPiiN @ Apr 19, 2010 - 8:59... Apr 19, 2010 - 4:33 PM
JuMPiiN QUOTE (TerBeau @ Apr 19, 2010 - 4:33... Apr 19, 2010 - 5:15 PM
TerBeau QUOTE (JuMPiiN @ Apr 19, 2010 - 6:15... Apr 19, 2010 - 9:19 PM TerBeau QUOTE (TerBeau @ Apr 19, 2010 - 5:33... Apr 19, 2010 - 10:03 PM njccmd2002 buy from ebay and there are three swapped beams th... Apr 19, 2010 - 5:08 PM _Jim_ Personally, I think think the beams is a waste of ... Apr 19, 2010 - 5:39 PM JuMPiiN The only reason I'm how do you say sketchy, ab... Apr 19, 2010 - 7:34 PM _Jim_ QUOTE (JuMPiiN @ Apr 19, 2010 - 8:34... Apr 19, 2010 - 7:54 PM JuMPiiN QUOTE (_Jim_ @ Apr 19, 2010 - 7:54 P... Apr 19, 2010 - 7:59 PM _Jim_ QUOTE (JuMPiiN @ Apr 19, 2010 - 8:59... Apr 19, 2010 - 8:13 PM njccmd2002 beams engine is a simple drop in engine.
Yes, 3sg... Apr 19, 2010 - 7:48 PM JuMPiiN QUOTE (njccmd2002 @ Apr 19, 2010 - 7... Apr 19, 2010 - 7:55 PM _Jim_ QUOTE (njccmd2002 @ Apr 19, 2010 - 8... Apr 19, 2010 - 8:03 PM Ted95 QUOTE (_Jim_ @ Apr 19, 2010 - 9:03 P... Apr 19, 2010 - 8:39 PM njccmd2002 i retract myself and any future beams vs boost. co... Apr 19, 2010 - 8:16 PM JuMPiiN Alright and could i do the swap myself in about a ... Apr 19, 2010 - 8:18 PM richee3 BOOST!!!!!!!! Apr 19, 2010 - 8:26 PM hurley97 A lot of the things you're concerned about wit... Apr 19, 2010 - 9:09 PM JuMPiiN I actually emailed that guy and he told me he... Apr 19, 2010 - 10:43 PM Ted95 QUOTE (JuMPiiN @ Apr 19, 2010 - 11:4... Apr 20, 2010 - 5:58 AM njccmd2002 if you going beams, please, please read my signatu... Apr 19, 2010 - 11:14 PM Ted95 QUOTE (JuMPiiN @ Apr 20, 2010 - 9:23... Apr 20, 2010 - 1:08 PM _Jim_ GL with the Beams Jumpin, let us know how it goes.... Apr 20, 2010 - 2:28 PM samir0189 QUOTE (_Jim_ @ Apr 20, 2010 - 3:28 P... Apr 20, 2010 - 2:44 PM njccmd2002 QUOTE (_Jim_ @ Apr 20, 2010 - 2:28 P... Apr 20, 2010 - 5:28 PM Nartanian Truth. He did ask for advice though, so advice was... Apr 20, 2010 - 3:06 PM samir0189 QUOTE (Nartanian @ Apr 20, 2010 - 4... Apr 20, 2010 - 3:14 PM JuMPiiN Wait.... so Jim your saying i could honestly just ... Apr 20, 2010 - 4:47 PM _Jim_ QUOTE (JuMPiiN @ Apr 20, 2010 - 5:47... Apr 20, 2010 - 7:24 PM JuMPiiN QUOTE (_Jim_ @ Apr 20, 2010 - 7:24 P... Apr 20, 2010 - 7:37 PM _Jim_ njccmd2002, there is no attitude on my end, nor is... Apr 20, 2010 - 7:41 PM JuMPiiN Anyone reccommend and place to order a good condit... Apr 20, 2010 - 8:19 PM _Jim_ QUOTE (JuMPiiN @ Apr 20, 2010 - 8:19... Apr 20, 2010 - 8:45 PM hurley97 If you were concerned about boost before, probably... Apr 20, 2010 - 8:52 PM JuMPiiN Ha well luckily for me in my state there really is... Apr 20, 2010 - 10:27 PM njccmd2002 believe me, the wiring part is easy. Apr 20, 2010 - 10:29 PM JuMPiiN I just want to know exactly how much it would cost... Apr 20, 2010 - 10:44 PM Toyota_Celica_97 just my opion if ima do a swap and had the money, ... Apr 20, 2010 - 11:38 PM JuMPiiN I actually looked at that clip and called about it... Apr 20, 2010 - 11:49 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 4th, 2025 - 12:07 PM |