 can i instal ABS? |
 Aug 12, 2010 - 1:52 AM
|
 
|
|
Enthusiast  Joined May 28, '10 From Oakley, Ca Currently Offline Reputation: 1 (100%)  |
94' Celica GT
no ABS can i add it? |
 |
Replies
|
Aug 12, 2010 - 6:45 PM
|
|
 Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
You need to source and/or replace:
sensors front and rear hubs rear wheel bearings front axles dust shields for front axle seals wiring abs ecu abs control unit brake master cylinder and basically all the brake lines that go along the firewall from the master cylinder to the control unit up until the splitters that go into the wheel wells and to the rear much easier to remove the system. The sensors almost always go bad so if you try to get used ones they will either be bad and/or stuck in the hub and replacing the sensors with new ones will cost you about $400 each. And getting to the lines on the firewall with the motor in the car is not going to be easy. But that won't be the worst part, the worst will be wiring it all in to a car that doesn't have the wiring for it. Even if you get the whole dash harness you would still need to take the dash out to install it, not to mention the wiring outside that goes to the sensors... but yes, it can be done. This post has been edited by hurley97: Aug 12, 2010 - 6:47 PM -------------------- |
|
Aug 13, 2010 - 11:25 AM
|
|
|
Enthusiast Joined May 28, '10 From Oakley, Ca Currently Offline Reputation: 1 (100%) |
QUOTE (hurley97 @ Aug 12, 2010 - 7:45 PM)  You need to source and/or replace: sensors front and rear hubs rear wheel bearings front axles dust shields for front axle seals wiring abs ecu abs control unit brake master cylinder and basically all the brake lines that go along the firewall from the master cylinder to the control unit up until the splitters that go into the wheel wells and to the rear much easier to remove the system. The sensors almost always go bad so if you try to get used ones they will either be bad and/or stuck in the hub and replacing the sensors with new ones will cost you about $400 each. And getting to the lines on the firewall with the motor in the car is not going to be easy. But that won't be the worst part, the worst will be wiring it all in to a car that doesn't have the wiring for it. Even if you get the whole dash harness you would still need to take the dash out to install it, not to mention the wiring outside that goes to the sensors... but yes, it can be done. so yeah... im not gonna even try then. haha |
Posts in this topic
Justin8358 can i instal ABS? Aug 12, 2010 - 1:52 AM
Johnnyny im sure you could but it would suck to do change o... Aug 12, 2010 - 3:29 AM Spider77 huh....i thought abs was standard on all gt's.... Aug 12, 2010 - 4:38 AM
Johnnyny QUOTE (Spider77 @ Aug 12, 2010 - 5:3... Aug 12, 2010 - 4:39 AM Justin8358 anyone have any idea how i would do it? Aug 12, 2010 - 11:48 AM Johnnyny it would really be easier to buy a celi with abs u... Aug 12, 2010 - 1:05 PM benzo my auto 96 had abs.
my manuel 95 doesnt.
i miss ... Aug 12, 2010 - 2:40 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 25th, 2025 - 4:05 AM |