 what size bolts hold the trans on a 7afe? |
 Nov 14, 2010 - 10:35 AM
|
 
|
|
Enthusiast Joined Oct 19, '09 From Las Vegas Currently Offline Reputation: 0 (0%)  |
like the tittle says. i took my trans out to replace clucth and flywheel. and when im putting the trans back on im missing bolts. now i was already missing a few, but now i only have 2 bolts. any idea what size bolts or if i can juts go to autozone and but some regular bolts to hold the trans to the block? any help appresheated.
|
 |
Replies
|
Nov 15, 2010 - 9:57 AM
|
|
|
Enthusiast  Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
there are (2) large bolts that have 17MM heads, they are on the top of the tranny. im not sure what size and pitch the threads are. the other 6 (i think) are 14MM heads. the thread is 10 X 1.25. they are also different lengths. 2 should be about 1.5 inches long and the other should be about 2.5 inches long. dont forget the starter bolts too
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Nov 15, 2010 - 4:11 PM
|
|
|
Enthusiast Joined Oct 19, '09 From Las Vegas Currently Offline Reputation: 0 (0%) |
QUOTE (Smaay @ Nov 15, 2010 - 9:57 AM)  there are (2) large bolts that have 17MM heads, they are on the top of the tranny. im not sure what size and pitch the threads are. the other 6 (i think) are 14MM heads. the thread is 10 X 1.25. they are also different lengths. 2 should be about 1.5 inches long and the other should be about 2.5 inches long. dont forget the starter bolts too sweet thanks.. |
Posts in this topic
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 14th, 2025 - 2:55 PM |