![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
A little bit of background to my story and what I call an almost miracle
![]() WOW, I can't believe how much of a coincidence its been for me. The same day I crashed my car which was on Dec. 13 2010 was the same day that Erahman posted up his 99 Celica GT with beams swap for sale. I couldn't believe that the opportunity presented itself so quickly. What are the chances of that. I mainly believe that its just the fact that I've been wanting to get a beams swap since September of 2008. I actually bought a 2008 Suzuki GSX-R 750 in July 2008. I was all ecstatic when I bought as anybody else would be, but when I found out about the beams swap thanks to Maikl I actually regretted buying the motorcycle. It then wasn't until may 2010 when I crashed my bike in the canyons that I knew the beams engine would be mine very soon. My parents have Triple AAA plus which allows you to tow any vehicle free of charge as long as it is not more than 100 miles. So I drove down to San Diego and the tow truck took my new Celica to my house ![]() I have to say that my dream car wouldn't of been possible if it wasn't for the fact that my grandma let me borrow $4,500. Those $4,500 that I used to buy the celica went a long ways. Erahman took real good care of the car and only put about 3,500 miles on the swap since June 2010. He has replaced a lot of maintenance parts. The one thing that was an upgrade was that fact that my celica now has ABS, power windows, power door locks and rear disk brakes!! ![]() feels damn good to be unique. Over here in So cal there are 4 million civics and 2 million Integras. and probably only 4 or 5 beams swap in all of California. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Walbro 255LPH fuel pump purchased from Tweak Tuning and WRC Style Rain Deflector given to me for about $8 thanks to batman! if anybody has a trd one in near perfect condition I'll trade you for my wrc one!!! ![]() This post has been edited by BonzaiCelica: Aug 6, 2022 - 3:12 AM -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
the straw technique might work for you, but i wonder how much it's restricting airflow. Try cleaning your MAF, IAC, throttle body/valve, make sure everything is plugged in/no vacuum leak. OR re-positioning of the MAF sensor. I think I missed it but all this happened after installing an after-market intake system with a cone filter? I'll check all the vacuum lines. Today after getting an aligned, it is getting closer and closer to dieing. The car's idle drops to about 500rpm and its getting worse and worse by the day. I'm cleaning that thing next and that could be my solution to my sluggish pedal feel?? In first gear it pulls nicely and my dirty Idle Speed/air Control Valve could also be the reason as to why my rpm gauge is off??? At 116 mph on the speedo, the speed cut limiter cuts off fuel to the engine. All JDM motors cut off at 111mph so I know my speedometer is off! Another thing is that at 105 mph my rpm are at 5,600rpm or something like that, I'll have to get video. RPM are a bit high wouldn't you say??? I know that 4th gear goes to 118mph, but I had to shift into 5th gear before Or else I wouldn't have been able to hit 111mph speed cut limiter in 4th gear. I'm using a usdm s54 speed sensor. maybe I need a new one or just calibrate my speedometer?? I did already reset the ecu and its running much better. On another Note I put in 4 gallons of 100 octane and about 9 gallons of 91 octane. that gave me a mixed octane rating of about/near 94 octane = 100 ron. Yes Tony-B, torque should be pretty good but I'm finding lag in the throttle. how the hell do you adjust the throttle cable to make it tighter??? I was only able to adjust the cable so that it controls how high my idle is when I have the car in neutral. thanks guys for taking such interest in my thread I appreciate it. I thought my thread was just another thread. Jeez i love 6gc member ![]() 80 MPH in 5th gear should just be around 4500rpm, maybe less i think. I haven't been on a motorway in a while. The dreaded MAF!!! I hope you get this sorted, torque in the beams is grand i find. Not turbo like or anything but 5th gear overtaking feels nice ![]() T can you get some video you cruising at 80mph in 5th gear and you topping out 3rd gear please!! Since you have all stock/factory installed engine. Mine was done by some tuning shop. -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() ![]() |
Lo-Fi Version | Time is now: April 30th, 2025 - 1:29 PM |