Injen 2040 5SFE install Options

[starscream10]

Hi guys

I have been reading a few post on installing the short ram Injen intake and have seen different setup for it.

The two ports sticking out of the intake pipe do I just plug them?, put a mini filter on them?, or connect to the valve cover?.

If i do connect to the valve cover what do I do with the stock connection which is connected to the throttle body that I disconnected.?

Thank you

[trdproven]

it is unnecessary to worry about all that, mine are the simplest two options.

My first option does not change anything, stock hoses stay where they are at and you just cap all nipples on the intake pipe. the second option just reroutes the breather hose from the TB to the intake pipe which means you have to cap the TB side.

your first mention of the minifilter is not needed you either keep it stock and cap the intake nipples or run the breather hose to the intake pipe and cap the TB side. Either way the rear Injen nipple can always stay capped - im sure this rear nipple can be plugged into a hose somewhere as I've seen but is not needed.

The PCV Valve is not even relevant at all in this case. that should be left untouched.

to make things easier visually.

OPTION #1


OPTION #2


This post has been edited by trdproven: Apr 6, 2012 - 2:13 AM