Injen 2040 5SFE install Options

[starscream10]

Hi guys

I have been reading a few post on installing the short ram Injen intake and have seen different setup for it.

The two ports sticking out of the intake pipe do I just plug them?, put a mini filter on them?, or connect to the valve cover?.

If i do connect to the valve cover what do I do with the stock connection which is connected to the throttle body that I disconnected.?

Thank you

[trdproven]

I had an injen intake back in 05...hated that intake (gave a lousy exhaust sound, and the apexi one i have is way better) but that was 3 intakes ago for me. YOu can take a picture to show how it looks like but my examples are all you need to do. Im sure you can use the rear nipple for a stock hose to connect but even at that for the most part the nipples on the injen intake are not necessary, they are just options because the stock hoses are already connected where they need to be.

This post has been edited by trdproven: Apr 7, 2012 - 1:02 AM

[ILoveMySilly97]

I had an injen intake back in 05...hated that intake (gave a lousy exhaust sound, and the apexi one i have is way better) but that was 3 intakes ago for me. YOu can take a picture to show how it looks like but my examples are all you need to do. Im sure you can use the rear nipple for a stock hose to connect but even at that for the most part the nipples on the injen intake are not necessary, they are just options because the stock hoses are already connected where they need to be.

How much did you get your apexi one for? I'm thinking about getting a different intake too since it doesn't put out much throttle response as I expected.