![]() |
![]() |
![]() |
|
Enthusiast Joined Apr 5, '12 From Kitchener, Ontario Currently Offline Reputation: 0 (0%) ![]() |
Hi guys
I have been reading a few post on installing the short ram Injen intake and have seen different setup for it. The two ports sticking out of the intake pipe do I just plug them?, put a mini filter on them?, or connect to the valve cover?. If i do connect to the valve cover what do I do with the stock connection which is connected to the throttle body that I disconnected.? Thank you |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
just the apexi intake filter and metal adapter was 125, then I had to get a 3" pipe for it, I got whatever closest apexi filter is close to 3" because they use decimal sizes. then I bought silicone reducer/couplers for the filter end and the TB end, and t-bolt clamps and finally a weapon r intake pipe (has better shine than cheap ebay ones and is 3" and a shorter pipe design. Spent like 275 for the whole setup.
![]() ![]() -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() ![]() |
Lo-Fi Version | Time is now: August 19th, 2025 - 2:54 PM |