need some help!, done search found nothing that will help Options

[mandrek]

OK, hey im in the proccess of pulling out my 7afe auto (broken rod/piston on number 3) i have the hayens manual and have done a number of searches on this forum, ihave looked at many "swap"threads, and nothing i have tryed has allowed me to "just pull out the axles"

front knuckles are off,
lower control arms are off
axles are hanging (being suspended w/ some rope)

ive had seafoam's deepcreep sprayed down the back (between the axle and the diff)
ive tryed the manuals suggestion of using a prybar to gently seporate the axle from the diff, wich only resulted with it slipping off and damaging the boot.
ive tryed 'just pull them straight out" as suggested by a few on the threads i pulled up wile doing a search.. there was some play but the axles definatly did not pull out, and i was affrade of seperating the axle from its base (feels like there is no stop twords the front of the axle as i pull back)

any help would be greatly apriciated


also how are you all getting to the back motor mount? i can get all but that one unbolted....

plz help!!!