6G Celicas Forums

Welcome Guest ( Log In | Register )

> JoshuaM's '97 Celica ZR, The Final Chapter - Goodbye
post Apr 23, 2012 - 5:58 PM
+Quote Post
JoshuaM



Enthusiast
****
Joined Mar 6, '12
From Brisbane, Australia
Currently Offline

Reputation: 6 (100%)




Hello 6GC'ers,

So here it is, my project thread, or more like a details thread because I don't think it will be evolving very quickly tongue.gif

Getting my Celica:

I decided about 2 years ago that I wanted to get a Celica for my first car (I am 17 now). I was originally looking at '93 model 5th Gen Celica manual Liftback (All lift back 5th and 6th gen Celicas in Aus have the 5S-FE), but once I started saving up a but more I decided to go for a 6GC. I liked the exterior styling of a nice clean 5th gen (has to be the update model though), but I was drawn to the 6th gens for the increased safety features, tighter turning circle, and their much nicer interior. It was also much easier to find them in good condition with low mileage. And I am now completely hooked on 6GC's wink.gif

So I was on the hunt for a '96-99 model ZR Celica (This is the top-spec model in Australia, equiv. to the GT/GT-S) manual with less than 180,000kms. My preference was red, and i wanted a sunroof, but I wasn't ruling anything out.

After searching regularly for a number of months, I came to the conclusion that it was going to be very difficult to find what I wanted in my budget near me. The ONLY car that I found in my state that suited my requirements was from a dealer and felt very untidy when I test drove it, lots of rattles etc. it felt like it had been thrashed... A theory supported when I found a fire extinguisher in the passenger footwell and receipts for heavy duty shocks and coils. Very disappointingly, this was not the car for me.

I kept searching and eventually found 'the one'. A Completely stock standard Silver 1997 model Toyota Celica ZR Manual, in excellent condition, with only 140,000kms (about 87,000 miles). Optional features included being the Factory Sunroof, Air con, Tinting and an Aftermarket Alarm upgrade (update: which I have now found out doesn't work tongue.gif).

It was initially too expensive for me. I kept looking at it every day, wishing that I could afford it... And 'if only' it was $1000 cheaper.... But then one day they dropped the price by $800, and I was on the phone immediately.

The problem was, it was in a dealership in Melbourne, AUS, just under 2000kms away from me. Because of the demand for cars out of Melbourne, it was too expensive to ship, so I had to organize to fly down and drive it back myself (an entire 2 weeks after I got my license).

After a very long process of organisation and the minor inconvenience of them selling the car to somebody else when I was organizing a mechanic inspection, it was mine XD

Here it is:
















The Future:

I have always been very much a fan of the stock look on Celicas (with all of the factory goodies installed of course!), so I do not have any extravagant plans..... And since purchasing my car I am now a broke uni student tongue.gif

But I am planning a few small things:

Aftermarket head unit for iPod integration.
JDM Clear Side Indicators
Spree LED dash kit + possibly everything else as well tongue.gif

I also have a few different ideas about less common mods to do, but they will require a lot of thought and probably some forum threads wink.gif

But you never know, if I keep reading all of you guys project builds I might eventually get a proper mod bug tongue.gif

I will keep updating this thread when I do anything, but I don't imagine I will be moving terribly quickly.

This post has been edited by JoshuaM: Sep 6, 2015 - 11:20 AM


--------------------


SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC!
2013 October Celica of the Month XD
Now: '00 NB8B Mazda MX5 -----> See it here in off topic!

Posts in this topic
- JoshuaM   JoshuaM's '97 Celica ZR   Apr 23, 2012 - 5:58 PM
- - Box   Not too bad then. Even better just find some touc...   Jul 19, 2013 - 5:15 PM
|- - JoshuaM   QUOTE (Box @ Jul 19, 2013 - 6:15 PM)...   Jul 19, 2013 - 5:18 PM
|- - Box   QUOTE (JoshuaM @ Jul 19, 2013 - 5:18...   Jul 19, 2013 - 10:20 PM
|- - JoshuaM   QUOTE (Box @ Jul 19, 2013 - 11:20 PM...   Jul 20, 2013 - 11:20 AM
- - JoshuaM   Its kinda annoying though cause everything is dirt...   Jul 19, 2013 - 10:10 PM
- - Box   Modesty is my middle name.   Jul 20, 2013 - 12:59 PM
- - JoshuaM   SSIII Front splitters installed! ...   Aug 3, 2013 - 7:14 AM
|- - rentaspace   QUOTE (JoshuaM @ Aug 3, 2013 - 7:14 ...   Aug 3, 2013 - 9:42 PM
- - SwissFerdi   Nicely done. The shape of yours reminds me of what...   Aug 3, 2013 - 8:33 AM
- - richee3   Nice pics.   Aug 3, 2013 - 9:23 AM
- - JoshuaM   QUOTE (SwissFerdi @ Aug 3, 2013 - 9...   Aug 3, 2013 - 9:28 AM
- - PR0PH37   Oh my! This has got to be the best looking ...   Aug 3, 2013 - 11:28 AM
- - Box   Your front passenger tire is low. MOAR LOWER...   Aug 3, 2013 - 12:28 PM
- - Syaoran   Makes me want projectors... sigh   Aug 3, 2013 - 12:44 PM
- - JoshuaM   QUOTE (PR0PH37 @ Aug 3, 2013 - 12:28...   Aug 3, 2013 - 9:22 PM
- - JoshuaM   I have been informed to lower it on OzCelica again   Aug 4, 2013 - 8:43 AM
|- - ILoveMySilly97   QUOTE (JoshuaM @ Aug 4, 2013 - 6:43 ...   Aug 4, 2013 - 2:59 PM
- - richee3   I don't mean to be a naysayer but I still very...   Aug 4, 2013 - 4:46 PM
|- - ILoveMySilly97   QUOTE (richee3 @ Aug 4, 2013 - 2:46 ...   Aug 4, 2013 - 5:23 PM
|- - Box   QUOTE (richee3 @ Aug 4, 2013 - 4:46 ...   Aug 4, 2013 - 10:08 PM
- - JoshuaM   Now that you guys found your own thread again... ...   Aug 9, 2013 - 8:08 AM
- - richee3   Pictures ASAP.   Aug 9, 2013 - 1:32 PM
- - CelicaZR   stop teasing...   Aug 14, 2013 - 7:10 PM
- - JoshuaM   QUOTE (richee3 @ Aug 9, 2013 - 2:32 ...   Aug 14, 2013 - 7:27 PM
- - JoshuaM   Brisbane Celica Club Cruise today - I was the only...   Aug 17, 2013 - 7:58 AM
- - richee3   25 mm spacers for the rear will be good for a set ...   Aug 17, 2013 - 8:06 AM
|- - JoshuaM   QUOTE (richee3 @ Aug 17, 2013 - 9:06...   Aug 17, 2013 - 8:08 AM
- - Syaoran   QUOTE (richee3 @ Aug 17, 2013 - 9:06...   Aug 17, 2013 - 10:11 AM
- - richee3   RE: JoshuaM's '97 Celica ZR   Aug 17, 2013 - 10:22 AM
- - Box   So apparently size doesn't really matter to ri...   Aug 17, 2013 - 2:05 PM
- - RabidTRD   Ah just poke them! Or put the whole wheel outs...   Aug 18, 2013 - 10:15 AM
|- - JoshuaM   QUOTE (RabidTRD @ Aug 18, 2013 - 10...   Aug 18, 2013 - 11:33 AM
- - JoshuaM   They look pretty awesome +25mm spacers on the ba...   Aug 27, 2013 - 12:40 AM
- - rentaspace   Wants....   Aug 27, 2013 - 12:49 AM
- - Box   LOWER!!!!!!!!...   Aug 27, 2013 - 1:06 AM
- - Timmyface   Send me those 25mm and buy some 20mm for it Looks...   Aug 27, 2013 - 1:32 AM
- - ILoveMySilly97   I had the same problem. My rpf1 was with 225/45 wa...   Aug 27, 2013 - 2:15 AM
- - richee3   Copycat!   Aug 27, 2013 - 2:16 AM
- - Timmyface   Were you scrubbing on fender or struts/springs?   Aug 27, 2013 - 2:17 AM
|- - ILoveMySilly97   QUOTE (Timmyface @ Aug 27, 2013 - 12...   Aug 27, 2013 - 4:03 AM
|- - JoshuaM   QUOTE (ILoveMySilly97 @ Aug 27, 2013 - 4...   Aug 27, 2013 - 4:34 AM
|- - rentaspace   QUOTE (JoshuaM @ Aug 27, 2013 - 4:34...   Aug 27, 2013 - 7:09 AM
|- - JoshuaM   QUOTE (rentaspace @ Aug 27, 2013 - 8...   Aug 27, 2013 - 7:15 AM
- - ILoveMySilly97   If you live in CenCal. I could direct you to one o...   Aug 27, 2013 - 1:25 PM
- - richee3   I had rubbing issues when I had 225/45/17's wi...   Aug 27, 2013 - 2:08 PM
- - njccmd2002   Lol not so rare rims no more   Aug 27, 2013 - 2:41 PM
- - JoshuaM   QUOTE (ILoveMySilly97 @ Aug 27, 2013 - 2...   Aug 27, 2013 - 8:14 PM
- - Timmyface   You can buy a guard roller off eBay for $90. ...   Aug 27, 2013 - 8:19 PM
|- - JoshuaM   QUOTE (Timmyface @ Aug 27, 2013 - 9...   Aug 27, 2013 - 9:06 PM
- - ILoveMySilly97   Damn! $60 per fender? Eff that. You'r...   Sep 12, 2013 - 6:40 PM
- - Box   Just use a sledgehammer tactfully.   Sep 12, 2013 - 7:24 PM
- - JoshuaM   So I have been a bit slack and never posted up the...   Oct 2, 2013 - 7:13 AM
- - Box   Well now you HAVE to lower it.   Oct 2, 2013 - 1:01 PM
- - sr666   That's looking sweet Josh nice effort   Oct 2, 2013 - 5:21 PM
- - rentaspace   :DDDD   Oct 3, 2013 - 1:48 AM
- - ILoveMySilly97   All you need to is to close that wheel gap and you...   Oct 3, 2013 - 2:59 AM
- - JoshuaM   QUOTE (Box @ Oct 2, 2013 - 1:01 PM) ...   Oct 3, 2013 - 9:17 AM
- - sr666   I maybe miles off here but if you get coilovers is...   Oct 3, 2013 - 9:45 AM
- - JoshuaM   There are a few things that are different I think,...   Oct 3, 2013 - 10:03 AM
- - sr666   That could work then although I could say don...   Oct 3, 2013 - 10:39 AM
- - JoshuaM   Yes, but all of the FWD Australian models were st2...   Oct 3, 2013 - 11:01 AM
|- - rentaspace   QUOTE (JoshuaM @ Oct 3, 2013 - 12:01...   Oct 3, 2013 - 8:28 PM
- - Box   Just just some lowering springs.   Oct 3, 2013 - 2:08 PM
- - JoshuaM   Woo... Changed taillights again! This time I ...   Oct 3, 2013 - 11:48 PM
|- - Box   QUOTE (JoshuaM @ Oct 3, 2013 - 11:48...   Oct 3, 2013 - 11:54 PM
|- - JoshuaM   QUOTE (Box @ Oct 4, 2013 - 12:54 AM)...   Oct 4, 2013 - 12:25 AM
- - Box   Fair enough. Don't have to get new struts.......   Oct 4, 2013 - 2:38 AM
- - sr666   Could you not get Koni Adjustables?   Oct 6, 2013 - 6:07 AM
|- - JoshuaM   QUOTE (sr666 @ Oct 6, 2013 - 6:07 AM...   Oct 6, 2013 - 9:05 AM
- - Box   AND YOU HAVE GIGANTIC SPIDERS!!!!...   Oct 6, 2013 - 9:08 AM
- - sr666   I don't know too much on exchange rates over h...   Oct 6, 2013 - 6:06 PM
|- - JoshuaM   QUOTE (sr666 @ Oct 6, 2013 - 7:06 PM...   Oct 6, 2013 - 6:40 PM
- - Box   Some coil-overs do, some don't.   Oct 6, 2013 - 6:45 PM
- - sr666   Ah fair enough then buddy :-) My old FK's wer...   Oct 7, 2013 - 1:43 AM
|- - JoshuaM   QUOTE (sr666 @ Oct 7, 2013 - 2:43 AM...   Oct 7, 2013 - 1:52 AM
- - ILoveMySilly97   Looks legit!   Oct 7, 2013 - 4:17 AM
- - JoshuaM   Forgot to say I bought a GT-FOUR Rear strut bar to...   Oct 7, 2013 - 4:58 AM
- - sr666   That's looking sweet mate nice work, you bough...   Oct 7, 2013 - 4:49 PM
|- - JoshuaM   QUOTE (sr666 @ Oct 7, 2013 - 4:49 PM...   Oct 7, 2013 - 7:07 PM
- - rentaspace   'bought' the rear strut bar xD   Oct 7, 2013 - 6:37 PM
- - JoshuaM   Wow, been a long time since an update. I just had ...   Apr 24, 2014 - 4:05 AM
- - Box   Well someone has been busy. If only you had bough...   Apr 24, 2014 - 5:49 AM
- - njccmd2002   your pictures are upside down   Apr 24, 2014 - 5:58 AM
- - Box   You're just standing on your head while using ...   Apr 24, 2014 - 6:29 AM
- - SwissFerdi   Sucks that the Mustang blew, I'm surprised you...   Apr 24, 2014 - 7:26 AM
- - JoshuaM   QUOTE (Box @ Apr 24, 2014 - 6:49 AM)...   Apr 24, 2014 - 2:18 PM
|- - njccmd2002   QUOTE (JoshuaM @ Apr 24, 2014 - 2:18...   Apr 24, 2014 - 8:36 PM
|- - JoshuaM   QUOTE (njccmd2002 @ Apr 24, 2014 - 9...   Apr 24, 2014 - 9:57 PM
- - Box   Yeah, finding a manual F-body is like finding a ne...   Apr 24, 2014 - 3:10 PM
- - Box   It doesn't know how to capitalize or punctuate...   Apr 24, 2014 - 9:47 PM
- - JoshuaM   Made an exciting purchase last night!!...   May 4, 2014 - 10:57 PM
- - Box   Better engine!?   May 5, 2014 - 11:51 PM
|- - JoshuaM   QUOTE (Box @ May 5, 2014 - 11:51 PM)...   May 6, 2014 - 12:31 AM
- - ILoveMySilly97   Nice find. Didn't know Tanabe made some for ou...   May 6, 2014 - 3:00 AM
|- - JoshuaM   QUOTE (ILoveMySilly97 @ May 6, 2014 - 4...   May 6, 2014 - 2:33 PM
- - Box   Woo, lower!   May 6, 2014 - 3:07 PM
- - cheela   oooh. nice score!   May 6, 2014 - 4:04 PM
- - JoshuaM   So I've been back in Australia for a month now...   Aug 2, 2014 - 10:55 AM
- - Box   You need a two post spoiler in your life.   Aug 2, 2014 - 12:49 PM
3 Pages V  < 1 2 3 >


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: May 19th, 2024 - 11:02 AM