ST202+ Bakuu0, LHD, performance, track Options

[Bakuu0]

ST202+

Engine: 3S-GE rev. 3 ,
TRD plug wires,
JDM ECU,
Oil Catch Tank D1
polyurethanes mounts
short intake with blitz filter, CAI
EGR out,
cooling plate

transmission:
E56 with exedy clutch

Suspension:
BC Racing coilovers,
polyurethanes,
many custom stuff,
custom front strut bar 3points,
17x8" Allutec, white,
17x7" DragWheels White,
16x7,5 oem st205 for track use,

Exhaust:
2,5", thermal insulation,
car catalyst out,

Other stuff:
JDM front projector headlights + 4300k, rear JDM lights
front ss3 and rear trd splitters,
Earl's brake lines,
underpanel aluminium,
fiberglass hood,
aerocatch

185hp/198nm

Some pictures:







More:
FB: LifeOnTrack
YT: Bakuu0
B.

This post has been edited by Bakuu0: Apr 10, 2018 - 2:40 PM

[Bakuu0]

In the near future we'll have the JapFest in Poland (meeting only for japanes car) and 1 week later our national celica meeting on track. Now I prepare my car for track use, clean and check everything.




B.

This post has been edited by Bakuu0: Jul 4, 2014 - 8:29 AM

[jordisonjr]

Damn nice looking car,
I didn't realize the 3sge made 185 hp!

[Bakuu0]

Damn nice looking car,
I didn't realize the 3sge made 185 hp!

3sge rev.3 after lifting 96> was 170hp, but there I've JDM ECU with 100 octane petrol, stainless exhaust pipe 2,5" with two straight mufflers, EGR out, short intake with CAI. That's all.

[KAOS]

Damn nice looking car,
I didn't realize the 3sge made 185 hp!

That's why I swapped out the 5SFE for the 3SGE -

[BonzaiCelica]

you swapped out your s54 for an e56? cause i dont see any superstrut or twin piston calipers on your suspension!

[Rusty]

It's a LHD ST202. From memory the UK/Euro spec are a bit different to the Japanese spec and they had the E56 on some GT ST202 models

[Bakuu0]

you swapped out your s54 for an e56? cause i dont see any superstrut or twin piston calipers on your suspension!

It's a LHD ST202. From memory the UK/Euro spec are a bit different to the Japanese spec and they had the E56 on some GT ST202 models

I had normal s54, but now I've e56 with viscose lsd. Suspension mcpherson type.

[SwissFerdi]

Excellent racecar build. Is that an Espace on track?

[Bakuu0]

Excellent racecar build.

It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.

Is that an Espace on track?

I do not know what it means. sorry for my language

[Mattattack]

Paint and wheels are gorgeous, sheesh

[BonzaiCelica]

ha hmm we learn something rusty.

[Rusty]

I had normal s54, but now I've e56 with viscose lsd. Suspension mcpherson type.

[Bakuu0]

thicker drive shafts from sss, cable assy transmission control (from sss or st205), stronger clutch (for e56 or for 3sgte) are necessary for use in mcpherson type.

This post has been edited by Bakuu0: Jul 16, 2014 - 1:40 AM

[SwissFerdi]

It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.

I do not know what it means. sorry for my language

A daily driver can still be a racecar! Renault Espace, the van behind you. Looking at the picture again, maybe it is not on track? I thought it was interesting.



This post has been edited by SwissFerdi: Jul 16, 2014 - 6:58 AM

[Bakuu0]

It's not a racecar, but I use the car on the track. There is no cage, rollbar. I've abs, air conditioning etc.

I do not know what it means. sorry for my language

A daily driver can still be a racecar! Renault Espace, the van behind you. Looking at the picture again, maybe it is not on track? I thought it was interesting.

Ok, now I get a point. It was reconnaissance ride one after another before timeattack. Renault was there for joke.




Some interior pics:



This post has been edited by Bakuu0: Jul 16, 2014 - 7:42 AM

[Bakuu0]

[sandusky1977]

I want the Celica Club Mats, and Plate Surrounds

[Bakuu0]

and timeattack: LINK

more soon

This post has been edited by Bakuu0: Jul 28, 2014 - 2:19 AM

[Bakuu0]

[jordisonjr]

So Clean! I like the Drag wheels much better however

[Bakuu0]

https://www.youtube.com/watch?v=QIbukdh__DE...eature=youtu.be

[coutogt4]

Very nice looking car.

[Bakuu0]

Very nice looking car.

thanks,


some pics:

[Bakuu0]

This post has been edited by Bakuu0: Aug 4, 2014 - 1:41 PM

[Bakuu0]

https://www.youtube.com/watch?v=a1-yLzjDRxk...eature=youtu.be

[SwissFerdi]

To be honest, I thought the driving beforehand seemed slightly reserved - excellent lines on this one though.

[Bakuu0]

To be honest, I thought the driving beforehand seemed slightly reserved - excellent lines on this one though.

it always looks slower on film

Viev from the wheel https://www.youtube.com/watch?v=UuI-fi_c1YY

[Bakuu0]

New video:
https://www.youtube.com/watch?v=x3jND7zSLQQ...eature=youtu.be

[Bakuu0]

work on conservation


Next week track day.

[Bakuu0]

Wet trackday, some pics:

[Bakuu0]

Winter time, working time.
-fiberglass hood, weight 6kg, fit perfect
-color, aerocatch in progress
-oem hood's lock out


This post has been edited by Bakuu0: Jan 10, 2015 - 5:00 PM

[BonzaiCelica]

How much is weight is the hood saving you?

[Bakuu0]

How much is weight is the hood saving you?

About 15kg. It's a lot at the front. Next step is to move the battery to the rear.

[Bakuu0]

Tank mounting changed.
Before:

Now:

B.

[Bakuu0]

Slowly forward:
-drilled holes for sprinklers and for hood's spoiler
-drilled holes for pins
-made pads for aerocatch

To do:
-aerocatch holes
-sprinklers hoses
-painting or tiling

[Rusty]

Clean mods & great track photos

Anything in the catch can?

[Bakuu0]

Clean mods & great track photos

thanks

Anything in the catch can?

Aerocatch mounting is not too complicated. MicroGrinder, drill, tape and no rush.

[igpx12]

Good install guide for those hood releases

http://youtu.be/rUt2bCxZidk

[Bakuu0]

Good install guide for those hood releases

http://youtu.be/rUt2bCxZidk

thanks, but I did it myself






B.

[igpx12]

Good install guide for those hood releases

http://youtu.be/rUt2bCxZidk

thanks, but I did it myself






B.

I was wondering what this style release would look like on our cars, Gotta say that I like it and might just have to get a set.

[Bakuu0]

a few steps forward

Underside painted:


Cooling plate converted for pins:


Now just taping the top of hood and mount.

[enderswift]

Great car

[SwissFerdi]

Engine looks like business, suspension even better. I love it.

[Bakuu0]

and a lot of this

[Bakuu0]

pins with custom coolingplate

[Bakuu0]

Hood's fitment corrected:

[Bakuu0]

Cooling plate taped.

B.

[Bakuu0]

[mi645]

a bit confused. 1st lhd? in uk? im lost.
2nd e56 but no super strut? factory? im lost
3d in 5th gear going 70mph where is ur rpm at?

also do u have a picture of ur cv axles? id like to see what kind u r using.

[Bakuu0]

a bit confused. 1st lhd? in uk? im lost.
2nd e56 but no super strut? factory? im lost
3d in 5th gear going 70mph where is ur rpm at?

also do u have a picture of ur cv axles? id like to see what kind u r using.

1st, I live in Poland (Europe), so LHD.
2nd, I've e56 transmission from sss wisco lsd, but suspension is McPherson type. Trans axle from sss. It's not a secret. P&P
3nd, e56 tranny is a little shorter than s54, I've no idea what rpm at 70mph, something around ~3100rpm.

[Bakuu0]

also do u have a picture of ur cv axles? id like to see what kind u r using.

I'll try to explain with my poor english .

Transaxles from sss are a litlle thicker (wider) in the entrance of e56, but on the outer side are the same (same width).
McPhersone - outside ----o----- entry
sss - outside ----o==== entry

btw. fusion can be also done

EDIT:
pic:
http://s1271.photobucket.com/user/cpietran...AG0290.jpg.html

This post has been edited by Bakuu0: Mar 16, 2015 - 8:01 AM

[Bakuu0]

new color for track wheels:

and tiries:

[cheela]

clean install on everything. looks great. and you track your car too. even better.

[BonzaiCelica]

whats the weight difference between those 94-95 wheels and the GT4 96-99 6 spoke wheel?

[Bakuu0]

whats the weight difference between those 94-95 wheels and the GT4 96-99 6 spoke wheel?

I've no idea. I don't know how much they weigh.

[TARManiAC]

What´s the name of those tires?

[Bakuu0]

What´s the name of those tires?

Profil XR01, soft.
Made in Poland.

[Bakuu0]

[TARManiAC]

Looks good. Are the tires street legal? link to www?

[TRDweaponX]

Nice build.

[Bakuu0]

something happens:

weight 1180kg

[Bakuu0]

[HectortheRican]

I'm in love with this build. Excellent work! Maybe one day I'll have enough money for street tires and track tires!
I can't wait to read more of your progress!

[Bakuu0]

https://www.youtube.com/watch?v=M-hcYtAupv4..._channel=Bakuu0

[Bakuu0]

Yokohama JAPFEST 2015
TimeAttack:



and:
https://www.youtube.com/watch?v=sv-Ch5bz1Qk..._channel=Bakuu0

[Bakuu0]

one of fev:

[Box]

You hood is sprinkled with powdered sugar?

[Bakuu0]

You hood is sprinkled with powdered sugar?

swarovski crystals

[Box]

Alright there Liberachi.

[Bakuu0]

https://p0lish.wordpress.com/2015/08/19/dza...rzeba-bylo-byc/






Bq.

[Bakuu0]

https://www.youtube.com/watch?v=yRGMYp_-TOo...eature=youtu.be

[Bakuu0]

[Bakuu0]

upgrade:

[BonzaiCelica]

Nice! Upgrade to twin piston already

[Bakuu0]

Nice! Upgrade to twin piston already

it's t25 avensis brake and 295mm disk

[BonzaiCelica]

Yea saw that upgrade on newcelica

[Bakuu0]

http://www.youtube.com/watch?v=-4JfCOK3J_c

[Bakuu0]

up:


oem ss3 mounted



rear wiper remowed for weight
BQ.

[Bakuu0]

Little protection:





BQ.

[BonzaiCelica]

??? what did you do?

does that celica with beams go around the track with you???

[Bakuu0]

??? what did you do?

It's just a rust protection. In Poland we've difficult weather condition for cars (salt in winter, wet condition etc.)
I protected edges with anticorrosive paint.

does that celica with beams go around the track with you???

It's 3sge rev.3, not a beams VVTI.

This post has been edited by Bakuu0: Mar 16, 2017 - 3:52 PM

[BonzaiCelica]

No no the white celica. The pic on page 4 show a turquoise celica with gt4 kit and the white celica which seems to be an ss3....

[Bakuu0]

No no the white celica. The pic on page 4 show a turquoise celica with gt4 kit and the white celica which seems to be an ss3....

ok, now I understand
Yes, it's ss3.
I don't know what was happening with this car. The car has changed owner.

[Bakuu0]

http://www.youtube.com/watch?v=8nNVQGuXyDs







Next week first trackday in 2017.
BQ.

[Bakuu0]

Onboard:
https://www.youtube.com/watch?v=7U8L244Y3Us...eature=youtu.be

BQ

[BonzaiCelica]

does this class not allow for passing other vehicles on turns? I mean going into turns and exiting turns.... mrs is a track car id build for sure.

[Bakuu0]

does this class not allow for passing other vehicles on turns? I mean going into turns and exiting turns.... mrs is a track car id build for sure.

Yes, we cannot passing on turns, only on straight.

[Bakuu0]

First aeromod for track use.
BQ.

[jordisonjr]

Those look pretty cool.
Any more info on those? What are they made of and how did you mount them? @tigawoods check these out.

[Bakuu0]

Those look pretty cool.
Any more info on those? What are they made of and how did you mount them? @tigawoods check these out.

Thanks,
https://www.flickr.com/photos/95634022@N06/...157680836489452
BQ.

This post has been edited by Bakuu0: May 8, 2017 - 2:09 PM

[BonzaiCelica]

for future reference....

http://www.6gc.net/forums/index.php?showtopic=97575

[Bakuu0]

Gearbox fusion: e56 (plates lsd) with FD and gears from rav4 (2008r). The gearbox is much shorter.

BQ.

This post has been edited by Bakuu0: May 26, 2017 - 7:50 AM

[Rusty]

Interesting gearbox build, are you still using the E56's viscous LSD?

[Bakuu0]

Interesting gearbox build, are you still using the E56's viscous LSD?

Thank.,
My e56 transmission has plate LSD (not a viscous)

[BonzaiCelica]

so you have a 4.9 final gear ratio now?? cause i know someone who's doing the same thing to his build

[Rusty]

Thank.,
My e56 transmission has plate LSD (not a viscous)

Ahh so same as my TRD mechanical clutch plate LSD

[Bakuu0]

[/url]
Weight reduction bro.

[Bakuu0]

tag tyres

[Bakuu0]

DIY front splitter with addjustable angle:




https://flic.kr/s/aHsm3Jxyyn

BQ.

This post has been edited by Bakuu0: Jul 2, 2017 - 6:42 AM