6G Celicas Forums

Welcome Guest ( Log In | Register )

> 7A-FTE made in Germany
post Dec 27, 2008 - 5:10 AM
+Quote Post
Hafkai



Enthusiast
*
Joined Dec 9, '05
From Germany
Currently Offline

Reputation: 0 (0%)




Hi, after over a year of gathering parts my Celica finally is in the garage and gets her custom header, exhaust and some other stuff.
Yesterday we fitted the big Evo9 intercooler, i had to get the ST205 crash bar because the stock one is to tight, intercooler piping was done too and i'm very happy with it. I will use the stock ST205 air filter box, since there is not much space between the filter box and the engine, the IC piping is a little bit tricky but it looks like we found a good route.









The header will be done in the next days.



Short list of parts i'm using:
- Garrett T25 Turbo from a CA18DET
- Mitsubishi EVO 9 Intercooler
- E-manage Ultimate
- Innovate LC-1 Wideband
- ST202 3S-GE Injectors (372ccm)
- ST205 Fuel Pump
- Bosch Blow-Off from a Audi S3
- Custom Header and 3" Exhaust
- dozens of other small parts wink.gif

Posts in this topic
- Hafkai   7A-FTE made in Germany   Dec 27, 2008 - 5:10 AM
- - Pollux   Nicht schlecht, Herr Specht (Not bad Mr. Woodpecke...   Dec 27, 2008 - 7:24 AM
- - hurley97   Holy hell!!! Is that massive intercool...   Dec 27, 2008 - 4:58 PM
- - malpaso   amazing job...   Dec 27, 2008 - 4:59 PM
- - RickJamesBish   Sieht gut aus. Wie viel kW sind in planung?   Dec 27, 2008 - 5:01 PM
- - Hafkai   QUOTE (Pollux @ Dec 27, 2008 - 1:24 ...   Dec 27, 2008 - 5:51 PM
- - hurley97   I have a small water to air that sits in the bay a...   Dec 28, 2008 - 12:06 PM
- - lagos   most efficient mounting of an intercooler to date....   Dec 28, 2008 - 5:12 PM
- - njccmd2002   that would block the air to the radiator, yes?   Dec 28, 2008 - 7:05 PM
- - enderswift   x2, wont the trackday benefits of the intercooler ...   Dec 28, 2008 - 8:45 PM
- - Batman722   QUOTE (njccmd2002 @ Dec 28, 2008 - 7...   Dec 29, 2008 - 12:16 AM
- - CelicaST_CALI   Plus he has fans... great 7afte build so far...   Dec 29, 2008 - 12:22 AM
- - enderswift   haha you're right, completely forgot about the...   Dec 29, 2008 - 12:53 AM
- - Hafkai   Header is completed and the rest of the exhaust wi...   Jan 4, 2009 - 9:05 AM
|- - Batman722   QUOTE (Hafkai @ Jan 4, 2009 - 9:05 A...   Jan 5, 2009 - 12:18 AM
- - enderswift   thats some CLEAN exhaust work there   Jan 4, 2009 - 2:26 PM
- - CelicaST_CALI   awwwww a cat wheres the fun in that?   Jan 4, 2009 - 3:05 PM
- - SpoonR530   Gotta love that German Engineering   Jan 4, 2009 - 9:02 PM
- - Hafkai   I'll try to fit the stock fan on the other sid...   Jan 5, 2009 - 5:19 AM
|- - malpaso   QUOTE (Hafkai @ Jan 5, 2009 - 11:19 ...   Jan 5, 2009 - 5:41 AM
- - Hafkai   Got new pics, there are still some things to do bu...   Jan 16, 2009 - 1:48 PM
- - Sebby   Grat job mate,keep up the good work!!   Jan 16, 2009 - 2:40 PM
- - playr158   Nice work, looks like your project is coming along...   Jan 16, 2009 - 2:49 PM
- - Hafkai   More pics   Jan 17, 2009 - 5:02 PM
- - normality78   i like the way how you fabricate the downpipe hous...   Jan 18, 2009 - 2:34 AM
- - Hafkai   IT'S ALIVE!! Today we finaly got eve...   Jan 19, 2009 - 6:40 PM
- - Hafkai   Dyno video First run with some engine knock becau...   Jan 20, 2009 - 5:11 PM
- - normality78   nice figure...!! cant wait to see full dyn...   Jan 20, 2009 - 9:15 PM
- - normality78   im watching the video but i also notice some knock...   Jan 20, 2009 - 9:24 PM
- - Hafkai   The loud knocking sounds are from the dyno. The ac...   Jan 21, 2009 - 4:54 AM
- - normality78   alright. that's scared me of the loudness. If ...   Jan 21, 2009 - 4:58 AM
- - Hafkai   I finally got the car back and it runs great, the ...   Jan 31, 2009 - 10:39 AM
- - normality78   keep it coming.....   Feb 1, 2009 - 6:37 AM
- - eggman40   man that is a GREAT install, i love how clean you ...   Feb 11, 2009 - 3:50 AM
- - WH95TE   everything looks great. good job   Feb 27, 2009 - 10:48 PM
- - Hafkai   I went to the track yesterday and the engine seems...   Apr 20, 2009 - 4:37 AM
|- - presure2   QUOTE (Hafkai @ Apr 20, 2009 - 4:37 ...   Apr 20, 2009 - 5:43 AM
- - Hafkai   Most of the time the egt is between 1300-1600F bu...   Apr 20, 2009 - 6:31 AM
- - Hafkai   After about 7k miles the engine still runs great, ...   Nov 9, 2009 - 9:25 AM
|- - Hanyo   QUOTE (Hafkai @ Nov 9, 2009 - 6:25 A...   Nov 9, 2009 - 5:18 PM
- - SwissFerdi   Awesome man, awesome...this thread is inspiration ...   Nov 9, 2009 - 10:35 AM
|- - Hafkai   QUOTE (SwissFerdi @ Nov 9, 2009 - 4...   Nov 9, 2009 - 2:50 PM
- - SwissFerdi   Interesting. OOBE said that 8 PSI was the max on s...   Nov 9, 2009 - 3:21 PM
|- - OOBE   QUOTE (SwissFerdi @ Nov 9, 2009 - 2...   Nov 9, 2009 - 4:21 PM
|- - SwissFerdi   QUOTE (Hafkai @ Nov 9, 2009 - 3:55 P...   Nov 9, 2009 - 5:06 PM
|- - OOBE   Ferdi, With good tuning, 10 PSI on a good size tu...   Nov 9, 2009 - 5:52 PM
||- - SwissFerdi   QUOTE (OOBE @ Nov 9, 2009 - 5:52 PM)...   Nov 9, 2009 - 5:58 PM
|- - celica74   QUOTE (SwissFerdi @ Nov 9, 2009 - 5...   Jun 23, 2010 - 5:57 PM
|- - Hafkai   QUOTE (celica74 @ Jun 24, 2010 - 12...   Jun 25, 2010 - 3:55 AM
|- - celica74   QUOTE (Hafkai @ Jun 25, 2010 - 4:55 ...   Jun 26, 2010 - 9:32 AM
- - Hafkai   No issues at all, it depends on the injection and ...   Nov 9, 2009 - 3:55 PM
- - OOBE   Well, the most important thing is to find a good t...   Nov 9, 2009 - 7:49 PM
- - SwissFerdi   I'd love to find somebody local that knew thei...   Nov 9, 2009 - 8:02 PM
- - OOBE   The spark will go off regardless, and there is no ...   Nov 9, 2009 - 8:46 PM
- - SwissFerdi   Okay. I was just thinking in relation of the pisto...   Nov 9, 2009 - 8:56 PM
- - CelicaST_CALI   Detonation would be the the spark igniting the mix...   Nov 9, 2009 - 9:03 PM
|- - Hafkai   QUOTE (CelicaST_CALI @ Nov 10, 2009 - 3...   Nov 10, 2009 - 4:58 AM
- - CelicaST_CALI   well i ment wayyy before haha...Detonation=heat......   Nov 10, 2009 - 11:33 PM
- - SwissFerdi   Hafkai, another question...you're running the ...   Nov 11, 2009 - 1:07 AM
|- - Hafkai   QUOTE (SwissFerdi @ Nov 11, 2009 - 7...   Nov 29, 2009 - 2:28 PM
|- - normality78   QUOTE (Hafkai @ Nov 29, 2009 - 2:28 ...   Apr 12, 2010 - 3:28 AM
|- - Hafkai   QUOTE (normality78 @ Apr 12, 2010 - 10...   Apr 15, 2010 - 5:51 PM
- - CelicaST_CALI   Ferdi,doc told me he had a 4agze with a c52 and 2...   Nov 11, 2009 - 1:11 AM
- - GMan   > Nov 9, 2009 - 8:02 PM > SwissFerdi ...   Nov 11, 2009 - 10:35 AM
|- - SwissFerdi   QUOTE (GMan @ Nov 11, 2009 - 10:35 A...   Nov 11, 2009 - 4:05 PM
- - FunkySR   OOBE, i've only taken 1 degree per psi of boos...   Nov 11, 2009 - 1:56 PM
|- - OOBE   QUOTE (FunkySR @ Nov 11, 2009 - 11:5...   Nov 14, 2009 - 12:22 PM
- - Culpable04   for someone with an EMS on their vehicule and a go...   Nov 12, 2009 - 12:14 PM
|- - SwissFerdi   QUOTE (Culpable04 @ Nov 12, 2009 - 12...   Nov 12, 2009 - 12:17 PM
- - Culpable04   Look !   Nov 12, 2009 - 3:56 PM
- - SwissFerdi   That is crazy...I had no idea. This is why I'm...   Nov 12, 2009 - 4:03 PM
- - SwissFerdi   Alright. Well, I guess it is money well spent. I k...   Nov 14, 2009 - 2:33 PM
- - Culpable04   what are the specs ( offset specially ) of your wh...   Nov 30, 2009 - 2:24 PM
- - Hafkai   The wheels are 16x7 ET35, the brake discs are stoc...   Nov 30, 2009 - 3:09 PM
- - Hafkai   Another Autobahn video , this time at about 12psi,...   Dec 5, 2009 - 10:19 AM
- - Hafkai   Got some new injectors.. SARD 650cc/min The rea...   Feb 15, 2010 - 5:27 PM
|- - presure2   QUOTE (Hafkai @ Feb 15, 2010 - 5:27 ...   Feb 15, 2010 - 5:31 PM
- - OOBE   Keep us updated, man. I'm no longer in the 7A-...   Feb 15, 2010 - 5:40 PM
- - SwissFerdi   What are the plans for the rebuild?   Apr 15, 2010 - 5:57 PM
|- - Hafkai   QUOTE (SwissFerdi @ Apr 16, 2010 - 12...   Apr 16, 2010 - 6:08 AM
- - mariosdarkworld   How is the pull with the 650cc injectors? Does tha...   Apr 16, 2010 - 4:26 PM
|- - Hafkai   QUOTE (mariosdarkworld @ Apr 16, 2010 - ...   Jun 6, 2010 - 3:56 PM
- - Hafkai   Today i went to a dyno and i'm really happy wi...   Jun 17, 2010 - 1:25 PM
- - RoyO   Very good results!!   Jun 17, 2010 - 2:07 PM
- - SwissFerdi   Ooooh...upgraded pistons, rods, and new gaskets an...   Jun 25, 2010 - 9:53 AM
- - normality78   Hafkai bro, I've sold my previous 7afte (stock...   Oct 13, 2010 - 4:59 AM
- - Hafkai   Sadly it's to late to push the stock engine to...   Oct 16, 2010 - 7:45 AM
- - malpaso   I had my old 7AFTE tuned to the limits on OEM inte...   Oct 16, 2010 - 11:47 AM
- - Hafkai   After taking the old engine apart i found out that...   Nov 14, 2010 - 4:11 PM
- - Johnnyny   wow that plug looks horrible but im glad ur contin...   Nov 14, 2010 - 5:06 PM
- - Hafkai   The new block is ready and the head just needs to ...   Dec 25, 2010 - 5:50 AM
- - enderswift   i cant wait to see the results   Jan 2, 2011 - 10:47 PM
- - jeffrosie   Been folowing this with great interest. Hope you f...   Jan 3, 2011 - 7:37 AM
- - 97celica_st   Where did you find the forged pistons and rings? a...   Jan 13, 2011 - 9:29 AM
- - Hafkai   You got a PN about the pistons The crankshaft is...   Jan 13, 2011 - 11:40 AM
- - Hafkai   The project is still alive but everything takes mu...   Jul 8, 2011 - 5:29 PM
|- - kurt95gt   QUOTE (Hafkai @ Jul 8, 2011 - 5:29 P...   Dec 5, 2011 - 1:53 PM
|- - RabidTRD   QUOTE (kurt95gt @ Dec 5, 2011 - 1:53...   Dec 5, 2011 - 3:30 PM
- - malpaso   Any update?   Dec 5, 2011 - 8:44 AM
- - Hafkai   QUOTE (malpaso @ Dec 5, 2011 - 2:44 ...   Dec 5, 2011 - 3:44 PM
2 Pages V   1 2 >


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: October 21st, 2019 - 6:21 AM