 JDM e153 from Mr2, will it work? |
 Oct 6, 2004 - 4:52 PM
|
 
|
 Enthusiast Joined May 21, '03 From Louisiana Currently Offline Reputation: 0 (0%)  |
I found this JDM e153 tranny out of an MR2. I talked to the guy that has it and he says he bought it for his ST205 swap but couldnt use it b/c the bracket for the shifter cables were on the wrong side. I looked at the tranny and kinda saw what he was talking about. But i havent heard of anyone else having that problem. I looked at the treanny and saw what he was saying. You can replace the selector shaft and selectors and have them both on the opposite side.....but then when you replace the shifter cable bracket its still on the other side. Is it supposed to be on the other side or is that what they meant in the wrie up on it where you have to extend the shifter cables......let me know guys......thanks!
This post has been edited by BigJ: Oct 6, 2004 - 5:12 PM |
Posts in this topic
BigJ JDM e153 from Mr2 Oct 6, 2004 - 4:52 PM
Doge Pretty sure that you have to switch the shift link... Oct 6, 2004 - 9:04 PM gtfc115 im in the same boat as that guy...is it possible t... Oct 6, 2004 - 10:33 PM recneps yeah theres a page on how to make the e153 work in... Oct 6, 2004 - 10:54 PM sphinx to make the shift cables work, you don't have ... Oct 7, 2004 - 11:05 AM Supersprynt Read this about E153 Tranny Swap
These are the pa... Oct 7, 2004 - 11:27 AM BigJ Ok im confused.....I know that you swap the selcto... Oct 9, 2004 - 3:09 PM
Consynx do you have to use all-trac tranny parts for 3S re... Oct 9, 2004 - 11:34 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 9th, 2025 - 9:39 PM |