It is finally time.... for boost!, UPDATE: new turbo on and boosting! Options

[shin]

good luck on the install. hope everything goes smoothly. post pics and vids.

[x_itchy_b_x]

get that thing boosted so you can post some pics

[jcbass7]

get it done! ive been waiting on brake parts from prtznet for over a month so im glad you didnt have to wait to long for your stuff

[6strngs]

well, I got a lot more done today than I expected to. here's a list of everything I can remember off the top of my head:
removed front bumper
removed entire exhaust and exhaust manifold
removed valve cover, swapped injectors, replaced valve cover
removed oil pan, replaced with 3s oil pan

ok, so it doesn't sound like a lot, but the oil pan alone took a couple hours. I worked basically from 11am until about 10pm. several breaks, but still. it's quite possible I could finish tomorrow. we'll see.
here's the only pictures I took.

old oil pan:


bye-bye NA:


stripped:

[jcaron9gt4]

yea man, that oil pan takes a bit. nice to see it all coming together!! now wake up early tomorrow and get this thing boosted!!!!! it seems like you got all the biitch work out of the way, so the rest should go smoothly and not take you long at all. btw, what bov are you using.

[6strngs]

yea man, that oil pan takes a bit. nice to see it all coming together!! now wake up early tomorrow and get this thing boosted!!!!! it seems like you got all the biitch work out of the way, so the rest should go smoothly and not take you long at all. btw, what bov are you using.

so much for waking up early, it's about 2:30 pm and I'm just waking up... lol. BOV is the oem mr2 one. for now, it's just getting vented to atmosphere, maybe I'll recirculate it later, who knows.

[6strngs]

sorry I didn't update last night, I was wrenching away with my buddy justin until about 3 in the morning. I'm getting so close! the turbo, manifold, downpipe assembly is in and installed. all the oil and coolant lines are hooked up. basically, everything is done except the intercooler piping. here's some pics:

here's the car:


here's the garage:





here's my buddy justin workin away at the coolant lines



and here she is:



btw, I have zero issues with my oil filter relocation lines hitting the downpipe. the only thing is, I need some kind of hose to use for my intake. the filter won't just sit there, I just have no idea what to use! I can't find anything anywhere...

This post has been edited by 6strngs: Jul 1, 2007 - 4:54 PM

[shin]

isn't your hose too close to the DP? especially when your's is rubber hose? when the DP gets too hot wouldn't it melt the hose? awesome job with the turbo install. if you need a hose you can get a 3" rubber tube like the one manny and i bought from autozone.

[6strngs]

isn't your hose too close to the DP? especially when your's is rubber hose? when the DP gets too hot wouldn't it melt the hose? awesome job with the turbo install. if you need a hose you can get a 3" rubber tube like the one manny and i bought from autozone.

the hose is about 1/2" away from touching the downpipe. I had gotten som braided steel sleeves for the hose, but it was so much of a pain to get on I just gave up after a half hour (and not being anywhere close). as for the intake hose, what I want is a rubber tube like you and manny got, but I can't find one at any of my local auto parts stores! somebody wanna mail me one?

[presure2]

that hose WILL melt.
its within 1/2" of your downpipe, which easily gets in exess of 5-600*, and within a couple inches or so of the SUPER hot manifold...ever see a pic of a 3sgte manifold after a hard boost run? it gets so hot, it GLOWS.
you loose that line in a situation like that, your engine is gonna be toast, and you'll be lucky if you dont have a SWEET car-b-que on your hands. those lines are carrying the lifeblood of your engine man! dont cheap out on them.
i'd keep a VERY close eye on that.
other than that, lookin like a turbo setup man!

i got that cheapo intake pipe @ autozone.

[x_itchy_b_x]

rune you lines over to the left, and wrap them with heat insulation.
those wont last long there. they will melt or crack and break. not good.
but other than that, like Manny said good job.

[6strngs]

that hose WILL melt.
its within 1/2" of your downpipe, which easily gets in exess of 5-600*, and within a couple inches or so of the SUPER hot manifold...ever see a pic of a 3sgte manifold after a hard boost run? it gets so hot, it GLOWS.
you loose that line in a situation like that, your engine is gonna be toast, and you'll be lucky if you dont have a SWEET car-b-que on your hands. those lines are carrying the lifeblood of your engine man! dont cheap out on them.
i'd keep a VERY close eye on that.
other than that, lookin like a turbo setup man!

i got that cheapo intake pipe @ autozone.

well, it was only meant to be temporary until I had some money to get stainless braided lines and the canton racing adaptor.. if I run the oil filter in the location that you have it, or shin has it, the lines physically touch the downpipe. where I have it, it's about a 1/2" away. I will keep an eye on it. and I won't be driving the car much until it has an exhaust, and after that I'll take it pretty easy until I have a water/methanol injection kit. so hopefully by then I should have enough money to get the stainless lines.

I guess I'll take a harder look around for that intake pipe. is it actually called "intake pipe" or something else? also, is it rubber or plastic?

I've got some of the IC piping done. it would be better if I had more 45* couplers. the way it's getting on there, 2 pipes come at different angle and I try my best to join them with a straight coupler. lol. only other thing is, I don't think the hood will close with my BOV where it is, so I gotta try to figure something out for that. I'm taking a break right now. I'll probably get back to it around 10pm tonight and keep working until it's done (for the most part) hopefully. I still gotta mount the intercooler. I had an idea, but it would require getting some bolts which would bolt into the little threaded things on the top of the IC, but I can't find any place around here that sells anything bigger than a 12mm bolt, and I need at least a 15mm or 16mm.

[CaliJeff]

I think u should post up some more pix like now !

[6strngs]

well, today was a good day. she started right up on the frst try! SOOO LOUD! sounds like a fricken muscle car, but I'm sure that's cause I have no exhaust, lol. smokes everywhere cause of how rich it runs. she idled great for a bit, then we had an oil leak... I'm pretty sure it's coming from the relocation kit where it bolts to the block. other than that, she's fine! I really need to tune it though. I still have to do some minor stuff like the under plastics and the front bumper. but I took it around the block at full throttle, and all I can say is wow! it's so fast! and the higher the RPMs go up, and the more it spools, the faster it goes! I'm going to hopefully fix all the odds and ends in a day or two. i need some money badly to get some braided lines and the canton racing adaptor, an exhaust, some dyno time, etc.

here's the only pic I have for now:


just to show you guys how close my oil filter relocation lines are:

[shin]

yup. just as i thought... those hoses are toooo close. but good job man. glad to see it fire up on the 1st try. just take things slowly. don't rush it. double check everything and you'll be boosting happily.

[6strngs]

yup. just as i thought... those hoses are toooo close. but good job man. glad to see it fire up on the 1st try. just take things slowly. don't rush it. double check everything and you'll be boosting happily.

I know what you're saying. and since I'm leaking oil from the relocation kit, I guess I'll be getting the canton adaptor and stainless lines sooner than I thought. in fact, I don't think I'll be driving it much if at all until I get them.

btw, you probably can't see in the pic but I was able to find an intake hose at kragen

[CaliJeff]

Is it kool if we meet up again at the same spot so i can take a look at it 1st hand ? I wanna see what i keep loathing over; what i'm gettin into

[presure2]

yup. just as i thought... those hoses are toooo close. but good job man. glad to see it fire up on the 1st try. just take things slowly. don't rush it. double check everything and you'll be boosting happily.

I know what you're saying. and since I'm leaking oil from the relocation kit, I guess I'll be getting the canton adaptor and stainless lines sooner than I thought. in fact, I don't think I'll be driving it much if at all until I get them.

btw, you probably can't see in the pic but I was able to find an intake hose at kragen

good job man!
the better its tuned, the better it will run too!!
as for those lines, the less you drive with them like that, the better off you'll be.
especially if your leaking oil from the block adapter.
remember, use boost wisely, and ONLY for good. never for evil..

[CaliJeff]

Fill that thing up with sum of the racing fuel which is readily available out here. 110 Octane YEA!!! Your hp would increase so dramatically.

[6strngs]

Fill that thing up with sum of the racing fuel which is readily available out here. 110 Octane YEA!!! Your hp would increase so dramatically.

where do I get that? I've never seen it anywhere.