 rpm stuck/possible misfire |
 Jun 12, 2010 - 3:57 PM
|
 
|
 Enthusiast  Joined Jul 27, '06 From Soda Currently Offline Reputation: 9 (91%)  |
I was affraid something would go wrong. Well, it isn't bad. I don't know if the throttle body is dirty or maybe I need to clean the iat. Not sure but once in a while, the rpm needle will stick to 2k rpm even when I'm at a dead stop. Anyone had this problem before? I just realized that the spark plug wires would sneak out of place a bit. Cylinder 1 had a heli-coil done to it so the spark plug wires don't go all the way down. Not sure if the spark plug wires would cause misfire. Drove it from texas with no problems at all. Now this...yay. I'm not worried about it because it'll be going through a 3sgte swap. But id like to be able to drive it for at least through september.
--------------------  |
Posts in this topic
block rpm stuck/possible misfire Jun 12, 2010 - 3:57 PM
sugarfree Yeah i think its the wires or distributor cap. If ... Jun 12, 2010 - 9:35 PM
block My first initial thought was the wires. Didn... Jun 12, 2010 - 9:59 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2026 - 5:58 PM |