Jun 22, 2010 - 5:07 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Okay, if you've been following my OT thread then great. If not, let me give you a rundown. So I yanked my motor and replaced a handful of crap. Oil pump seal, water pump, timing belt, accessory belts, clutch, etc.
After driving for a few days I have compiled a list of things I have noticed. I'm hoping some of the knowledgeable 5s guys can help shed some light. 1. Idle was 750 before the work, now its at 1250. No vacuum lines were touched. I did the propane test and found nothing. I adjusted the TPS and found nothing. 2. When sitting at idle it sounds like a belt is too tight. I'm going to loosen/remove the AC belt today and see if it corrects it. The sound is almost like the car is surging, but the Rpm's stay constant. Like I can hear the belt making a full rotation. 3. When in neutral at idle there is a high pitch squeaking noise coming from the engine bay. When I lightly press my foot to the clutch pedal (not disengaged, moving maybe 1/2") it goes away. The last thing I want to do is take it all back out to replace the throwout bearing. Anyone have any ideas? -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
95CelicaST post maintenance issues Jun 22, 2010 - 5:07 PM
presure2 QUOTE (95CelicaST @ Jun 22, 2010 - 6... Jun 22, 2010 - 5:14 PM
95CelicaST Damnit. There's got to be an easier way to jus... Jun 22, 2010 - 5:20 PM
Jamchell Well if you replaced the T/O bearing when you did ... Jun 22, 2010 - 11:53 PM
95CelicaST New bearing. The sound seems to come and go. I had... Jun 23, 2010 - 12:18 AM
95CelicaST Just an update:
Idle has returned to normal. I... Jun 25, 2010 - 3:26 PM
Jamchell Sure, if your throw out bearing is bad(bearing or ... Jun 25, 2010 - 5:49 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 15th, 2026 - 10:46 AM |