6G Celicas Forums

Welcome Guest ( Log In | Register )

> JoshuaM's '97 Celica ZR, The Final Chapter - Goodbye
post Apr 23, 2012 - 5:58 PM
+Quote Post
JoshuaM



Enthusiast
****
Joined Mar 6, '12
From Brisbane, Australia
Currently Offline

Reputation: 6 (100%)




Hello 6GC'ers,

So here it is, my project thread, or more like a details thread because I don't think it will be evolving very quickly tongue.gif

Getting my Celica:

I decided about 2 years ago that I wanted to get a Celica for my first car (I am 17 now). I was originally looking at '93 model 5th Gen Celica manual Liftback (All lift back 5th and 6th gen Celicas in Aus have the 5S-FE), but once I started saving up a but more I decided to go for a 6GC. I liked the exterior styling of a nice clean 5th gen (has to be the update model though), but I was drawn to the 6th gens for the increased safety features, tighter turning circle, and their much nicer interior. It was also much easier to find them in good condition with low mileage. And I am now completely hooked on 6GC's wink.gif

So I was on the hunt for a '96-99 model ZR Celica (This is the top-spec model in Australia, equiv. to the GT/GT-S) manual with less than 180,000kms. My preference was red, and i wanted a sunroof, but I wasn't ruling anything out.

After searching regularly for a number of months, I came to the conclusion that it was going to be very difficult to find what I wanted in my budget near me. The ONLY car that I found in my state that suited my requirements was from a dealer and felt very untidy when I test drove it, lots of rattles etc. it felt like it had been thrashed... A theory supported when I found a fire extinguisher in the passenger footwell and receipts for heavy duty shocks and coils. Very disappointingly, this was not the car for me.

I kept searching and eventually found 'the one'. A Completely stock standard Silver 1997 model Toyota Celica ZR Manual, in excellent condition, with only 140,000kms (about 87,000 miles). Optional features included being the Factory Sunroof, Air con, Tinting and an Aftermarket Alarm upgrade (update: which I have now found out doesn't work tongue.gif).

It was initially too expensive for me. I kept looking at it every day, wishing that I could afford it... And 'if only' it was $1000 cheaper.... But then one day they dropped the price by $800, and I was on the phone immediately.

The problem was, it was in a dealership in Melbourne, AUS, just under 2000kms away from me. Because of the demand for cars out of Melbourne, it was too expensive to ship, so I had to organize to fly down and drive it back myself (an entire 2 weeks after I got my license).

After a very long process of organisation and the minor inconvenience of them selling the car to somebody else when I was organizing a mechanic inspection, it was mine XD

Here it is:
















The Future:

I have always been very much a fan of the stock look on Celicas (with all of the factory goodies installed of course!), so I do not have any extravagant plans..... And since purchasing my car I am now a broke uni student tongue.gif

But I am planning a few small things:

Aftermarket head unit for iPod integration.
JDM Clear Side Indicators
Spree LED dash kit + possibly everything else as well tongue.gif

I also have a few different ideas about less common mods to do, but they will require a lot of thought and probably some forum threads wink.gif

But you never know, if I keep reading all of you guys project builds I might eventually get a proper mod bug tongue.gif

I will keep updating this thread when I do anything, but I don't imagine I will be moving terribly quickly.

This post has been edited by JoshuaM: Sep 6, 2015 - 11:20 AM


--------------------


SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC!
2013 October Celica of the Month XD
Now: '00 NB8B Mazda MX5 -----> See it here in off topic!

Posts in this topic
- JoshuaM   JoshuaM's '97 Celica ZR   Apr 23, 2012 - 5:58 PM
- - ILoveMySilly97   If you live in CenCal. I could direct you to one o...   Aug 27, 2013 - 1:25 PM
- - richee3   I had rubbing issues when I had 225/45/17's wi...   Aug 27, 2013 - 2:08 PM
- - njccmd2002   Lol not so rare rims no more   Aug 27, 2013 - 2:41 PM
- - JoshuaM   QUOTE (ILoveMySilly97 @ Aug 27, 2013 - 2...   Aug 27, 2013 - 8:14 PM
- - Timmyface   You can buy a guard roller off eBay for $90. ...   Aug 27, 2013 - 8:19 PM
|- - JoshuaM   QUOTE (Timmyface @ Aug 27, 2013 - 9...   Aug 27, 2013 - 9:06 PM
- - ILoveMySilly97   Damn! $60 per fender? Eff that. You'r...   Sep 12, 2013 - 6:40 PM
- - Box   Just use a sledgehammer tactfully.   Sep 12, 2013 - 7:24 PM
- - JoshuaM   So I have been a bit slack and never posted up the...   Oct 2, 2013 - 7:13 AM
- - Box   Well now you HAVE to lower it.   Oct 2, 2013 - 1:01 PM
- - sr666   That's looking sweet Josh nice effort   Oct 2, 2013 - 5:21 PM
- - rentaspace   :DDDD   Oct 3, 2013 - 1:48 AM
- - ILoveMySilly97   All you need to is to close that wheel gap and you...   Oct 3, 2013 - 2:59 AM
- - JoshuaM   QUOTE (Box @ Oct 2, 2013 - 1:01 PM) ...   Oct 3, 2013 - 9:17 AM
- - sr666   I maybe miles off here but if you get coilovers is...   Oct 3, 2013 - 9:45 AM
- - JoshuaM   There are a few things that are different I think,...   Oct 3, 2013 - 10:03 AM
- - sr666   That could work then although I could say don...   Oct 3, 2013 - 10:39 AM
- - JoshuaM   Yes, but all of the FWD Australian models were st2...   Oct 3, 2013 - 11:01 AM
|- - rentaspace   QUOTE (JoshuaM @ Oct 3, 2013 - 12:01...   Oct 3, 2013 - 8:28 PM
- - Box   Just just some lowering springs.   Oct 3, 2013 - 2:08 PM
- - JoshuaM   Woo... Changed taillights again! This time I ...   Oct 3, 2013 - 11:48 PM
|- - Box   QUOTE (JoshuaM @ Oct 3, 2013 - 11:48...   Oct 3, 2013 - 11:54 PM
|- - JoshuaM   QUOTE (Box @ Oct 4, 2013 - 12:54 AM)...   Oct 4, 2013 - 12:25 AM
- - Box   Fair enough. Don't have to get new struts.......   Oct 4, 2013 - 2:38 AM
- - sr666   Could you not get Koni Adjustables?   Oct 6, 2013 - 6:07 AM
|- - JoshuaM   QUOTE (sr666 @ Oct 6, 2013 - 6:07 AM...   Oct 6, 2013 - 9:05 AM
- - Box   AND YOU HAVE GIGANTIC SPIDERS!!!!...   Oct 6, 2013 - 9:08 AM
- - sr666   I don't know too much on exchange rates over h...   Oct 6, 2013 - 6:06 PM
|- - JoshuaM   QUOTE (sr666 @ Oct 6, 2013 - 7:06 PM...   Oct 6, 2013 - 6:40 PM
- - Box   Some coil-overs do, some don't.   Oct 6, 2013 - 6:45 PM
- - sr666   Ah fair enough then buddy :-) My old FK's wer...   Oct 7, 2013 - 1:43 AM
|- - JoshuaM   QUOTE (sr666 @ Oct 7, 2013 - 2:43 AM...   Oct 7, 2013 - 1:52 AM
- - ILoveMySilly97   Looks legit!   Oct 7, 2013 - 4:17 AM
- - JoshuaM   Forgot to say I bought a GT-FOUR Rear strut bar to...   Oct 7, 2013 - 4:58 AM
- - sr666   That's looking sweet mate nice work, you bough...   Oct 7, 2013 - 4:49 PM
|- - JoshuaM   QUOTE (sr666 @ Oct 7, 2013 - 4:49 PM...   Oct 7, 2013 - 7:07 PM
- - rentaspace   'bought' the rear strut bar xD   Oct 7, 2013 - 6:37 PM
- - JoshuaM   Wow, been a long time since an update. I just had ...   Apr 24, 2014 - 4:05 AM
- - Box   Well someone has been busy. If only you had bough...   Apr 24, 2014 - 5:49 AM
- - njccmd2002   your pictures are upside down   Apr 24, 2014 - 5:58 AM
- - Box   You're just standing on your head while using ...   Apr 24, 2014 - 6:29 AM
- - SwissFerdi   Sucks that the Mustang blew, I'm surprised you...   Apr 24, 2014 - 7:26 AM
- - JoshuaM   QUOTE (Box @ Apr 24, 2014 - 6:49 AM)...   Apr 24, 2014 - 2:18 PM
|- - njccmd2002   QUOTE (JoshuaM @ Apr 24, 2014 - 2:18...   Apr 24, 2014 - 8:36 PM
|- - JoshuaM   QUOTE (njccmd2002 @ Apr 24, 2014 - 9...   Apr 24, 2014 - 9:57 PM
- - Box   Yeah, finding a manual F-body is like finding a ne...   Apr 24, 2014 - 3:10 PM
- - Box   It doesn't know how to capitalize or punctuate...   Apr 24, 2014 - 9:47 PM
- - JoshuaM   Made an exciting purchase last night!!...   May 4, 2014 - 10:57 PM
- - Box   Better engine!?   May 5, 2014 - 11:51 PM
|- - JoshuaM   QUOTE (Box @ May 5, 2014 - 11:51 PM)...   May 6, 2014 - 12:31 AM
- - ILoveMySilly97   Nice find. Didn't know Tanabe made some for ou...   May 6, 2014 - 3:00 AM
|- - JoshuaM   QUOTE (ILoveMySilly97 @ May 6, 2014 - 4...   May 6, 2014 - 2:33 PM
- - Box   Woo, lower!   May 6, 2014 - 3:07 PM
- - cheela   oooh. nice score!   May 6, 2014 - 4:04 PM
- - JoshuaM   So I've been back in Australia for a month now...   Aug 2, 2014 - 10:55 AM
- - Box   You need a two post spoiler in your life.   Aug 2, 2014 - 12:49 PM
- - ILoveMySilly97   Looks so clean!   Aug 2, 2014 - 1:52 PM
- - JoshuaM   QUOTE (Box @ Aug 2, 2014 - 1:49 PM) ...   Aug 3, 2014 - 2:11 AM
- - Box   Now just have to install it.   Aug 3, 2014 - 10:19 PM
- - njccmd2002   i had to, i just had to...   Aug 4, 2014 - 11:14 AM
- - JoshuaM   QUOTE (Box @ Aug 3, 2014 - 11:19 PM)...   Aug 5, 2014 - 10:00 AM
- - JoshuaM   EXHAUST TIMEEEEE!!!! Look what ...   Aug 12, 2014 - 10:25 AM
|- - JFXtreme007   Mate your car is gonna sound so much better! r...   Aug 13, 2014 - 12:16 AM
|- - JoshuaM   QUOTE (JFXtreme007 @ Aug 13, 2014 - 1...   Aug 16, 2014 - 7:36 AM
|- - igpx12   QUOTE (JoshuaM @ Aug 16, 2014 - 7:36...   Aug 17, 2014 - 7:19 PM
|- - JoshuaM   QUOTE (igpx12 @ Aug 17, 2014 - 8:19 ...   Aug 19, 2014 - 1:43 AM
|- - JFXtreme007   I really quite like the new sound! much nicer...   Aug 20, 2014 - 4:41 AM
- - rentaspace   Should of posted that photo I sent you on FB lol.....   Aug 17, 2014 - 10:53 PM
- - JoshuaM   BIG UPDATE: Part 1: Installed headers with a Frie...   Aug 26, 2014 - 10:18 AM
- - Box   Headers? You did a V6 swap and didn't tell an...   Aug 26, 2014 - 2:16 PM
- - Smaay   you need to turn this hose around. if you revverse...   Aug 26, 2014 - 4:55 PM
- - JoshuaM   QUOTE (Box @ Aug 26, 2014 - 2:16 PM)...   Aug 26, 2014 - 7:26 PM
- - Box   Headers is plural and header is singular. Inline ...   Aug 26, 2014 - 8:20 PM
|- - JoshuaM   QUOTE (Box @ Aug 26, 2014 - 9:20 PM)...   Aug 26, 2014 - 8:33 PM
- - Box   Tough love.   Aug 26, 2014 - 8:58 PM
- - JoshuaM   So a bit of an update... First of all.... a new t...   Oct 24, 2014 - 11:35 PM
|- - Box   QUOTE (JoshuaM @ Oct 24, 2014 - 11:3...   Oct 25, 2014 - 1:44 PM
- - JFXtreme007   Man love the update! so many awesome additions...   Oct 25, 2014 - 6:23 AM
- - rentaspace   Man those two first gens were mad. (To all that do...   Oct 27, 2014 - 5:52 PM
- - cheela   yeah those 1st gens are clean!! and wow...   Oct 27, 2014 - 6:20 PM
|- - rentaspace   QUOTE (cheela @ Oct 27, 2014 - 6:20 ...   Oct 27, 2014 - 6:44 PM
- - JoshuaM   QUOTE (JFXtreme007 @ Oct 25, 2014 - 6...   Dec 3, 2014 - 9:13 AM
- - richee3   There's really no reason to buy a complete cli...   Dec 3, 2014 - 9:51 AM
- - mkernz22   Damnittttttt. I'm just a little too late, but ...   Dec 3, 2014 - 10:36 AM
- - cheela   why is your progress moving so fast!?!...   Dec 3, 2014 - 10:52 AM
- - JoshuaM   QUOTE (richee3 @ Dec 3, 2014 - 9:51 ...   Dec 3, 2014 - 4:06 PM
- - JoshuaM   I had found a supplier for C-ONE lightweight flywh...   Dec 7, 2014 - 2:40 AM
- - ILoveMySilly97   Man I'm jealous! you even got the hurrican...   Dec 7, 2014 - 5:13 PM
|- - JoshuaM   QUOTE (ILoveMySilly97 @ Dec 7, 2014 - 6...   Dec 7, 2014 - 10:31 PM
- - BonzaiCelica   go for the kakimoto n1 its quieter at 94 db and sm...   Dec 8, 2014 - 9:03 PM
|- - JoshuaM   QUOTE (BonzaiCelica @ Dec 8, 2014 - 10...   Dec 11, 2014 - 7:33 AM
- - BonzaiCelica   My advise is stay away from a canister style exhau...   Dec 11, 2014 - 1:55 PM
- - Rusty   The HKS exhaust I have, I find is surprisingly qui...   Dec 12, 2014 - 1:59 AM
- - njccmd2002   i have kakimoto and love it.   Dec 12, 2014 - 8:53 AM
- - JoshuaM   QUOTE (BonzaiCelica @ Dec 11, 2014 - 1...   Dec 12, 2014 - 10:14 AM
- - Box   Have to remember, every 10 decibels means it's...   Dec 12, 2014 - 2:56 PM
3 Pages V  < 1 2 3 >


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: June 23rd, 2026 - 3:32 AM