Dec 16, 2012 - 1:28 PM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Aug 25, '08 From England Currently Offline Reputation: 1 (100%) |
I was certain I started a build thread on here, but for the life of me I can not find it so forgive me if I start again and its old news.
About a year and a half ago my current GT4 failed its yearly inspection (MOT) with rusty sills, they were fixed and it subsequently passed but it set alarm bells ringing in my head that the poor things days were numbered. I decided that I would buy a shell and swap everything onto it. so I hunted for a reasonable shell to start work on. While I was looking, I had to extend my garage. I only had a single car garage so not enough space to work or store stuff. So I decided to extend my garage backwards a bit Work started. ![]() and after a few weeks, finished ;0 ![]() ![]() About the same time a shell turned up, well it was sold as a shell, but it was more or less a complete car minus the engine and gearbox. ![]() ![]() ![]() It was in good condition with no rust, even the interior was in pretty much spot on condition, not that I need much of it ![]() ![]() I set to wrok more or less straight away ![]() First job was to strip everything off the car ![]() everything went, all the looms, glass, suspension the works ![]() Next job was to remove the sound deadening material ![]() ![]() it then went outside for a thorough jet wash go get rid of all the years of crap ![]() ![]() As I was moving the battery to the inside I could remove the battery tray ![]() which I did ![]() ![]() Next up I needed to get to the bottom of the car....this was going to require some ingenuity. -------------------- |
Nial ST205 Total Rebuild Dec 16, 2012 - 1:28 PM
Langing "Excuse the crappy welding but it was the fir... Jun 21, 2014 - 7:49 AM
Nial Unfortunately I have had no help everything I hav... Jun 21, 2014 - 8:41 AM
Langing QUOTE (Nial @ Jun 21, 2014 - 9:41 AM... Jun 21, 2014 - 9:48 AM
Nial cheers bud, in a strange way it's good to know... Jun 21, 2014 - 11:08 AM
Langing Superb photos of your rotisserie, Nial!
What ... Jun 21, 2014 - 11:58 AM
Nial It sounds like you pretty much have it figured out... Jun 21, 2014 - 12:38 PM
Langing I've had a little Campbell Hausfeld 8 Gallon, ... Jun 21, 2014 - 2:09 PM
Nial Very helpful thanks I have been looking at an Ing... Jun 21, 2014 - 2:24 PM
Nial Well, I have managed to sort myself out with a com... Jul 6, 2014 - 8:21 AM
Smaay once again, total awesomeness in your build. I can... Jul 6, 2014 - 10:24 AM
Nial Thanks
I have certainly learned a lot about pain... Jul 6, 2014 - 11:49 AM
Langing QUOTE (Nial @ Jul 6, 2014 - 12:49 PM... Jul 6, 2014 - 9:07 PM
Langing Nial, you are, indeed, an impressive "man of ... Jul 6, 2014 - 9:02 PM
Nial Thanks I am a firm believer that you should never... Jul 7, 2014 - 12:28 AM
Langing QUOTE (Nial @ Jul 7, 2014 - 1:28 AM)... Jul 11, 2014 - 9:40 AM
Nial Ok I will try......The vapour in the tank is cause... Jul 11, 2014 - 12:23 PM
Langing How about that water separator in the YouTube vide... Jul 11, 2014 - 5:28 PM
Nial I have a similar one fitted, seems to do the job. ... Jul 12, 2014 - 1:40 AM
Langing QUOTE (Nial @ Jul 12, 2014 - 2:40 AM... Jul 20, 2014 - 7:09 PM
Nial A bit of an interlude from working on the car all ... Jul 20, 2014 - 8:25 AM
Nial Probably as good as anything! It's just th... Jul 22, 2014 - 9:50 AM
HaysoosKreesto I literally read every word of this thread and it ... Jul 27, 2014 - 2:01 PM
Nial Thanks it is always nice to know that someone enj... Jul 27, 2014 - 2:22 PM
Langing QUOTE (Nial @ Jul 27, 2014 - 3:22 PM... Jul 27, 2014 - 3:18 PM
Nial The 185 uses what is basically a FMIC mounted on t... Jul 27, 2014 - 3:32 PM
Langing QUOTE (Nial @ Jul 27, 2014 - 4:32 PM... Jul 27, 2014 - 7:08 PM
Smaay QUOTE (Langing @ Jul 27, 2014 - 5:08... Jul 27, 2014 - 11:00 PM
Langing QUOTE (Smaay @ Jul 28, 2014 - 12:00 ... Jul 28, 2014 - 6:11 AM
njccmd2002 The difference is like the diference between the 9... Jul 27, 2014 - 7:31 PM
Nial Finally got this glued together, if you want to ha... Aug 3, 2014 - 10:34 AM
JoshuaM QUOTE (Nial @ Aug 3, 2014 - 11:34 AM... Aug 3, 2014 - 11:02 AM
Nial QUOTE (JoshuaM @ Aug 3, 2014 - 12:02... Aug 8, 2014 - 11:16 AM
Nial Nearly finished Aug 3, 2014 - 11:24 AM
richee3 There's nothing in this thread that falls shor... Aug 8, 2014 - 12:06 PM
enderswift QUOTE (richee3 @ Aug 8, 2014 - 1:06 ... Aug 8, 2014 - 1:28 PM
Smaay loctite blue will work just fine Aug 9, 2014 - 12:38 AM
mandrek WOW!!! looking great!!!... Aug 9, 2014 - 2:27 PM
Nial Hub tastic
Brand new backing plates that I ha... Aug 11, 2014 - 11:56 AM
Nial More from allenchrome electroplating, sadly the on... Aug 29, 2014 - 8:16 AM
Batman722 You should have made your own dampener
Things lo... Aug 29, 2014 - 8:31 AM
enderswift Pressing in bearings and hubs without damaging the... Aug 29, 2014 - 9:41 AM
Langing QUOTE (enderswift @ Aug 29, 2014 - 10... Sep 8, 2014 - 1:24 PM
Nial QUOTE (Batman722 @ Aug 29, 2014 - 9... Aug 29, 2014 - 10:33 AM
Nial A bit of minor fabrication, the centre beam copyin... Sep 2, 2014 - 1:42 PM
Nial This has to be a first.......Can't decide if I... Sep 5, 2014 - 10:57 AM
Langing QUOTE (Nial @ Sep 5, 2014 - 11:57 AM... Sep 8, 2014 - 12:50 PM
kurt95gt This build is insane
Love every bit of it! Sep 5, 2014 - 1:14 PM
Nial Cheers Kurt every step is a step closer to gettin... Sep 5, 2014 - 1:19 PM
Batman722 The vent seems to be in the wrong bumper
Seems a... Sep 5, 2014 - 3:56 PM
Nial Thanks
Oh it is pure pointlessness, I wanted t... Sep 5, 2014 - 5:09 PM
Tigawoods it could reduce drag! but you have a big ol ga... Sep 5, 2014 - 5:20 PM
Nial Guess what I will be learning to do next......... Sep 8, 2014 - 11:59 AM
Nial That would be nice having the only one, but I don... Sep 8, 2014 - 1:16 PM
Langing QUOTE (Nial @ Sep 8, 2014 - 2:16 PM)... Sep 8, 2014 - 5:33 PM
Nial QUOTE (Langing @ Sep 8, 2014 - 6:33 ... Sep 9, 2014 - 12:17 AM
Langing QUOTE (Nial @ Sep 9, 2014 - 1:17 AM)... Sep 9, 2014 - 9:27 AM
Nial Hmmm that looks interesting, would be good to be a... Sep 8, 2014 - 1:33 PM
enderswift That press kit indeed looks perfect for the job Sep 8, 2014 - 9:48 PM
Nial Thanks very much to be honest I knew this was goi... Sep 9, 2014 - 11:18 AM
Nial Well, after a lot of research and long hours of lo... Sep 10, 2014 - 4:46 PM
HaysoosKreesto QUOTE (Nial @ Sep 10, 2014 - 5:46 PM... Sep 11, 2014 - 10:08 AM
Nial Well today has been a turning point, firstly, it... Sep 14, 2014 - 7:32 AM
Nial Not really much to show, but it keeps record of my... Sep 14, 2014 - 12:37 PM
enderswift A part of me wants you to throw this thing into th... Sep 14, 2014 - 2:57 PM
Nial Guess what tonight's job is
And done... Sep 16, 2014 - 2:56 PM
radioinactive 1st post here on the forums and id like to say tha... Sep 18, 2014 - 1:19 AM
Nial Thanks
Some colour at last
Only one ... Sep 21, 2014 - 10:58 AM
4-eyed-freek fantastic work! Sep 21, 2014 - 2:18 PM
Nial Thanks
It could be better, but I am learning as ... Sep 22, 2014 - 6:34 AM
Langing QUOTE (Nial @ Sep 22, 2014 - 7:34 AM... Sep 22, 2014 - 9:09 AM
Nial QUOTE (Langing @ Sep 22, 2014 - 10:0... Sep 22, 2014 - 11:38 AM
Nial Today is a good day.
Definitely a great day.
At ... Oct 3, 2014 - 12:23 PM
Langing Nial,
It is freaking scary how beautiful it is be... Oct 3, 2014 - 12:53 PM
Nial Thanks
I think it does seem like that it is jump... Oct 3, 2014 - 12:58 PM
enderswift That is one sexy engine bay. Can't wait to see... Oct 3, 2014 - 4:59 PM
Nial Well that's the rear sub frame in....not easy ... Oct 11, 2014 - 3:13 AM
njccmd2002 i can eat off of that. that is amazing. beautifu... Oct 11, 2014 - 5:50 AM
enderswift That looks amazing!
get a better camera! Oct 11, 2014 - 6:40 AM
Nial QUOTE (enderswift @ Oct 11, 2014 - 7... Oct 11, 2014 - 10:03 AM
Nial A small bit of progress today.
Fitting the front ... Oct 11, 2014 - 3:21 PM
Edser Wow!!! That looks awesome! Oct 11, 2014 - 4:39 PM
enderswift amazing Oct 11, 2014 - 5:39 PM
Langing What is the order of assembly? You are starting wi... Oct 12, 2014 - 9:10 AM
Nial The engine is about a year or so away. interior ne... Oct 12, 2014 - 1:23 PM
Nial A whole lot of fun today, i still hate fibreglassi... Oct 19, 2014 - 11:48 AM
Langing QUOTE (Nial @ Oct 19, 2014 - 12:48 P... Oct 20, 2014 - 12:01 AM
njccmd2002 wow, this is dedication to a car. Oct 19, 2014 - 7:48 PM
Bitter But will it pass inspection when you're done? Oct 20, 2014 - 7:46 AM
Nial QUOTE (Bitter @ Oct 20, 2014 - 8:46 ... Oct 20, 2014 - 8:01 AM
4-eyed-freek he is most likely referring to the MOT Oct 20, 2014 - 8:41 AM
Nial It`ll pass an MOT no worries. The only time yo... Oct 20, 2014 - 8:47 AM
luka I wish the rules were like that where I live.
If ... Oct 20, 2014 - 10:26 AM
Nial Luckily we can do more or less what we want to, an... Oct 20, 2014 - 12:49 PM
Nial A small bit of progress tonight.
Inspired by some... Oct 20, 2014 - 2:45 PM
Edser QUOTE (Nial @ Oct 20, 2014 - 2:45 PM... Oct 22, 2014 - 3:05 PM
enderswift crazy attention to detail Oct 20, 2014 - 6:56 PM
DST94 I love you. I'm just saying.
Nothing but respe... Oct 21, 2014 - 8:12 PM
Nial thanks. I always said you can feel the love on 6gc... Oct 22, 2014 - 12:32 AM
BonzaiCelica casting marks what? casting marks who? Oct 22, 2014 - 3:17 AM
luka At least in the USA, the housing needs to have a D... Oct 22, 2014 - 5:05 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 18th, 2026 - 4:56 PM |