6G Celicas Forums

I'm sure I can't beat azian_advanced and his "how-to-do"s , however I belive at least one person will appreciate that (am I right Tina? )

Let's do some work...
1. useful equipment :

a) well known fog lamps
part numbers:
R 81210-20280
L 81220-20270



b) lamp brackets (you can also see already installed fog light wire from factory! just plug-and-play)
part numbers:
R 52015-20310
L 52016-20150



c) 6 screws (I don't know what "international marking" is, but we call them "size 10")

2. checking some details... If you want install them "by the book" you will need:

a) fog light relay
b) fog light switch
c) fuse (20A)

locations...


relay...


switch...


and fuse...


if you don't have anything, prepare to pay about USD140

part numbers:




*if you don't want to pay that amount see "second choice" way at the end (point 5)

3. switch swap, easy thing, just screwdriver needed... remove all necessary screws, disconnect plug with wires and just pull multi-switch out... For relay you will not need any tool. Just plug it in (it's "dumb-proof", can't plug it wrong )...



4. everithing done. Now just see how nice it works



5. "second choice" way. If you don't want to spend money for multifunctional switch swap and relay, just buy any switch/button and rake up some wires...

a) wires connect like this... (short circuit of contacts shown below, turns your foglights on )...


b) ...and if you add to the "short circuit" any switch...



...you have working foglights also
***warning*** : if you forget turn your foglights off (leaving a car), you kill your battery! There is no "warning sound" like headlights has...

Hope sticky this...

This post has been edited by malpaso: Jan 26, 2013 - 3:34 PM

Where can I get the fogs for tha 94-95 celi

Would this be something I could put onto a '94 celica st?

question: since im wiring oem fogs on a 95, i donthave a harness for fogs, but i do have a second choice switch, fuse and relay. how do i go about making it work?

Im getting foglights for my 95 celica and i have no clue on how to wire them...any help

auto parts stores usually sella cheap and easy kit. its what i did.

Just want to say thanks to Malpaso for this guide
It helped me wired up the foggies for jaylenewin!

Hi,
I need to know what kind of relay do i need for the fog lights.Picture in the tutorial is down so anyone can please help?
Thanks in advance!

i can see the pics fine

I'm pretending to do this swap.... I already have the relay (junk yard 4 free) 8D, fog ligths (eBay) and tomorrow I will get the 2 way switch (10 dlls)..... But I have a problem..... I don't see the wiring cables....

If you have a pre facelift model, you have to add the wiring yourself.

From where so I have to star the wiring??

So as long as you don't have the multi function switch the fogs will never work?

Switch is in and all wired up!! Still no wiring yet!! Jajajajajaja

Hi, sorry to bring up an old thread but i need help.

So I have the multi-function switch and the fog lights, BUT..... I have a 94 USDM Celica, and therefore I don't have the stock wiring harness.

Since this installation guide is based on/assumes that you have the stock wiring harness, how would I go about installing the fog lights?

I know how old this thread is, but I just want to add some information that may be helpful to some. If you are going with the "second option" install, there is a factory Toyota toggle switch that fits in the hole without modification. It came in 3rd generation 4Runners and I believe some Tacomas. I currently have this exact switch installed and can confirm its exact fitment. It's a tight fit because of how far the prongs stick out the back, but with a bit of bending and wiggling it sits right in there.

Part number 00550-35976.

Toyota fog light switch, #00550-35976