MAGutz's GT Project, *RECENTLY UPDATED* "My 94 has evolved into 97." Options

[MAGutz]

I picked up some Celica goodies yesterday, but first, here are a couple photos:


^That GODLIKE center arm rest! Matching leather seats would make this picture even better.


^The Celica mats that I found the other day.





Now for the parts that I picked up the other day. ISpy anybody?



Finished installations:

^So FRESH and so clean CLEAN! I can't wait to polish these.


^Those panel covers.




The space underneath the rear strut bar is a perfect place to run some wires through. I currently have them coming from the space in the side panel where the seats actually latch into. Two of the bolts that secure the strut bar to the body were different and even the bolts from my '94 were different.
. . .
OCD...!!!

The guy I bought these parts from also had a TOMS lip in okay condition. I still might go grab it, but it would need some repair. As for the TRD sideskirts that I snagged, I'm not going to install them until I get out of the city. Gotta keep that **** clean. Also considering opening up the JDM lights and removing the amber...?

SIDENOTE: Does anybody have an extra JDM tail light harness?

And thanks for all the comments! I appreciate the fact that people are watching my progress and hope my final product will not disappoint.

This post has been edited by MAGutz: Aug 13, 2014 - 11:38 AM

[bloodMoney]

You don't need the JDM harnesses. The US ones will work just the same.

[cheela]

TOM's Lip! get it!!! hahahah.
yeah you don't need the JDM harness.

[Lil-Joe101]

I picked up some Celica goodies yesterday, but first, here are a couple photos:


^That GODLIKE center arm rest! Matching leather seats would make this picture even better.


^The Celica mats that I found the other day.





Now for the parts that I picked up the other day. ISpy anybody?



Finished installations:

^So FRESH and so clean CLEAN! I can't wait to polish these.


^Those panel covers.




The space underneath the rear strut bar is a perfect place to run some wires through. I currently have them coming from the space in the side panel where the seats actually latch into. Two of the bolts that secure the strut bar to the body were different and even the bolts from my '94 were different.
. . .
OCD...!!!

The guy I bought these parts from also had a TOMS lip in okay condition. I still might go grab it, but it would need some repair. As for the TRD sideskirts that I snagged, I'm not going to install them until I get out of the city. Gotta keep that **** clean. Also considering opening up the JDM lights and removing the amber...?

SIDENOTE: Does anybody have an extra JDM tail light harness?

And thanks for all the comments! I appreciate the fact that people are watching my progress and hope my final product will not disappoint.

Nice to see someone with a similar audio setup

[MAGutz]

Nice to see someone with a similar audio setup

It was done by the previous owner. I had two subs in the back as well, but I think I may have fried either my amp/capacitor/both.

[Lil-Joe101]

Not cool man

[MAGutz]

I changed my oil the other day and found that my engine was leaking all over the place. I plan on rebuilding the engine in the future, but for now, I'll just fix the easy leaks. I figure a good place to start would be with the radiator hose as the leak coming from the top hose is obvious. Anybody have suggestions on high quality radiator hoses both silicon and metal? Does anybody have preference on what vacuum hoses they use?