Rusty's SS-II progress thread, Many TRD goodies Options

[Rusty]

This is my Celica progress thread






1996 ST202 SSII 3S-GE Celica
and a little info about it on what's been done
HKS Pod filter + Short intake
TRD spark plug leads
Denso Iriduim spark plugs
Toyota KYB Gas shocks
Lowering Springs
Tom's Racing Pedal set (came with car)
Alpine Headunit (ipod connection)
Clarion 6.5" speakers
Clarion 6.5" speakers
other than that I've kept clean and shiny



the parts are in Japan and will take 6-8 weeks via ship to reach me
I'll post pics (and the prices) as I recieve parts

This post has been edited by Rusty: Jan 20, 2014 - 9:14 PM

[3SGTE]

looks like some good things going on there rusty, any engine pics of intake etc? any plans for big rims or jdm projectors?

[Rusty]

lol, there might be

[3SGTE]

haha a celica of mystery!! my bad.... just realised your signature has pic of engine and intake!! lol

Im sure you will keep us all updated mate

[Rusty]

well apart from the "mystery parts" i'm going to add
intake pipeing cold airbox, I hope
a new boot for the gear stick
& lights...for the clusters and ignition ring


Parts are hopefully on there way and get here late august?

[Rusty]

22 more days till they arrive into the country

also now got new 205 directionals instead of 195 mixed

UPDATED PIC of tyres


Yay only 15 days till they arrive I'm going to be nice here and give you some info


Note this is the total for each part (I dont pay for shipping or feight to may place )

White TRD Cap
$48 + GST EACH (why not I'm buying stuff for my celica?)

$55 + EACH

$40 + EACH

$450 + gst EACH

$125 + EACH

$305 + gst EACH
$305 + gst EACH

$165 + each
$165 + each

$325 + each
$325 + each

sub total $2,308

GST $288.50

Total $2,596.50

This post has been edited by Rusty: Aug 1, 2008 - 12:23 AM

[delusionz]

Post a picture of your TOM`S racing pedals. Ps, I can rig up a blue ignition ring for you if you want, I have 2 spare clear rings, Toyota stopped putting them in Celicas after 1995, What I did was take a splice from the cigarette lighter power and run some wire through the dash plastics.

[Rusty]

notice all 4 (clutch brake accelerator & foot rest)

I can rig up a blue ignition ring for you if you want ... Toyota stopped putting them in Celicas after 1995, What I did was take a splice from the cigarette lighter power and run some wire through the dash plastics

I dunno I might just put a new bulb in (since its not working at the moment)

[delusionz]

I think your ignition ring plastic might be black with no transparent bit....

Here's the difference, 1996 on the left, 1995 on the right:


PS. When I looked at my pedals closer it had some stupid chinese on the top and levin(???????) on the bottom, definitely not TOM`S ... Eww.

[Rusty]

When I looked at my pedals closer it had some stupid chinese on the top and levin(???????) on the bottom, definitely not TOM`S ... Eww.

oh well...
is that part hard to take out... gosh I'm going to be busy on my hoilday

BIG NEWS>>>> all Parts have finally reached Toyota NZ (for )

and I'll will get them to arrive 25 August Just after I get back from Aussie

[Rusty]

YES!!! PARTS are at my place (except one is missing so i contacted TNZ), but im not there im in aussie

[Rusty]

YES I Have all parts(for STAGE 1 lol) here are some pictures
















Whats that?????









pictures missing SS-III Badge, Red FRONT SS-III Spiltters, SS-III Grille & TRD Cap

will post prices shorty

[stetsonaw]

can't believe i haven't posted here yet. great to see your car coming along so well man. how much all those brand new parts set you back?

[delusionz]

Sweet!!!!!!

those TRD strut braces look very sturdy, I envy ur projectors, wouldnt mind the grill and badge either... ur so many steps ahead of me now hehe

[MercuryFree]

That reminds me, I still need to put in my clear highs haha. Damn front bumper being such a pain to take off and put on again.

Nice bar. I am rather jealous

[Rusty]

SSIII Front grille
53114-20101 SEA-FRIEGHT NZD $61.00 = USD $43

SS-III badge
75311-20480 SEA-FRIEGHT NZD $45.00 = USD $31.00
TRD strut brace

53607-ST001 NZD $506.00 = USD $352.00

GT-4 Rear strut brace
53605-20020 SEA-FRIEGHT – NZD $140.00 = USD $97.50

Projector Low Beam
RH: 81012-20100 OVERNIGHT & SEA-FREIGHT NZD $343.00 = USD $239.00
LH: 81014-20100 OVERNIGHT & SEA-FREIGHT NZD $343.00 = USD $239.00
Low beam Total NZD $686.00 =USD $478.00

Projector High Beam
RH: 81170-20050 SEA-FREIGHT NZD $185.00 = USD $129.00
LH: 81130-20050 SEA-FREIGHT NZD $185.00 = USD $129.00
High Beam Total NZD $370.00 = USD $258.00

Low & High Lights Total NZD $1056.00 = USD $736.00

SS-III Front Splitters
RH: 76851-20060-D0 SEA-FREIGHT NZD $365.00 = USD $254.00
LH: 76852-20050-D0 SEA-FREIGHT NZD $365.00 = USD $254.00

White TRD Cap
08298-SP077 NZD $54 = USD $37.60

Total NZD $2,596.50 = USD $1,809.60

those projectors are cheaper than cheap (a guy here sells them for USD $850, which is suppose to be very cheap) , but still quite alot to spend

I got up at 6am this morning just to look the the front strutbrace


and then later on I'll get the side skirts and rear splitters

This post has been edited by Rusty: Aug 26, 2008 - 3:50 PM

[Rusty]

lights in used SS-III connectors


oh yea. I wont put the front splitters in right now or else it will look front heavy

[delusionz]

wow that looks awesome! what do u mean by front heavy?

EDIT: Oh you mean wait until you get rear splitters aswell?

This post has been edited by delusionz: Aug 28, 2008 - 3:54 AM

[Rusty]

yup rear splitters and side skirts

[gt_driFFter]

Did you order those splitters pre-painted or something? Projectors are the best exterior mod someone can do!

[LastOfTheSTs]

Rusty I'm loving the car, it's looking awesome!

[95_gt]

wow those projectors look so cool! i want to get some for mine! is there a website were i can order these?

[Rusty]

Did you order those splitters pre-painted or something?

Yup sure did used this thread here with all the part names and numbers (then added my colour codes at the end)
http://www.6gc.net/forums/index.php?showtopic=39945

Rusty I'm loving the car, it's looking awesome!

thanks, still got a bit to do, then it will look even better

wow those projectors look so cool! i want to get some for mine! is there a website were i can order these?

yup, Im loving the projectors heaps, looks good during the day even better at night time, just that cut off and the beams pointing out
go through your local Toyota dealer or see the FS threads here. I went through toyota NZ- straight importing from Japan Toyota/ TRD Japan I got discounnted price and free shipping from japan to my house

[Rusty]

Rear Strut brace covers
TO-6434220160-CO x2 Price unknown

SS-III Side Skirts
RH: 76911-20900
LH: 76912-20900 $185 +GST = $208
TOTAL $416

SS-III Rear Splitters
RH: 76893-20130-D0
LH: 76894-20110-D0 $325+ GST = $365
TOTAL $ 731

Gear Stick Boot
58808-20120-C0 $69 +GST = $77

TRD Gear Stick
33504-SP003 $131 + GST = $147

(*Prices in $NZD GST= 12.5%)

Part numbers are correct I hope

so these are the next stuff I'm getting, I've got to start saving & in a couple of weeks, will place an order for these.
just wondering on the side skirts they cant be pre-painted can they? 76911-20900 -DO?
and anyone know the price for the rear end Strut brace covers

This post has been edited by Rusty: Sep 2, 2008 - 11:46 PM

[stetsonaw]

where did you get the side indicators and how much? whatthe was wondering.

[Rusty]

trademe (NZs version of Ebay)
$NZD 40ish (came wth new amber bulbs)

well according to the SS-III thread here the side skirts aren't painted, but i'll check when I oder them

[delusionz]

Hey Andy, I ordered the same indicators from trademe, turns out the guy I went to pick them up from has a shop full of them right around the corner from my house, PM me if you decide you'd like a pair of them and I'll be your middle man.

[Rusty]

just waiting to hear back from my supplier for prices then a 5-6 week wait till they arrive

[Rusty]

right time for an update. depsoiting money on friday then another 5-6 week wait, so around X mas time they should arrive...sweet

[delusionz]

holly crap oem bodykits are expensive!!!!!!!!

$ 731 for rear splitters... damn toyota.... their prices are so overrated even my ss3 doesn't have its own kit haha

wonder what TRD splitters would cost

[parriehunter]

Damn that is ridiculous alright.

There is a guy selling them on TM;

http://www.trademe.co.nz/Trade-Me-Motors/C...n-183020448.htm

http://www.trademe.co.nz/Trade-Me-Motors/C...n-183020450.htm

Alot cheaper just have to get them painted. dont know how well they will fit tho.

[Rusty]

haha you have to know the right people
that Tradme kit looks like a SS-II kit like you have parriehunter

GT-Four Rear Strut brace covers
64333-20160-C0 (x2) $50.625

SS-III Side Skirts
RH: 76911-20900-D0 $180
LH: 76912-20900-D0 $180

SS-III Rear Splitters
RH: 76893-20130-D0 $393.75
LH: 76894-20110-D0 $393.75

Gear Stick Boot
58808-20120-C0 $77

TRD Gear Knob
33504-SP003 $95.625


Total $1370.75

these prices are slightly more expensive on someof them, because the last person I delt with left

This post has been edited by Rusty: Oct 23, 2008 - 3:08 PM

[parriehunter]

The SSII isnt good enough??? hahaha j/j

If he doesn't want to spend over $700 for SSIII ones. Whats the difference? cant say i have seen them side by side. I just thought the front was different.

[delusionz]

The trademe ones I've seen around, the splitters and rear endcaps from that cheap trademe kit look like TRD but the front splitters on the TRD ones have holes in the front (air dams or wateva).

[Rusty]

haha actually saw a curren today with the kit, but looked like it was the standard kit (because it was an oldy driving) also notice how many more curren and celica's are in my area now. THERES HEEAPS!

the SS-III run longer and are thiner, were as the SS-II one is shorter and fatter. (both front and rear)

The trademe ones I've seen around, the splitters and rear endcaps from that cheap trademe kit look like TRD but the front splitters on the TRD ones have holes in the front (air dams or wateva).

Ah what have you got a pic of them? TRD ones

[parriehunter]

haha actually saw a curren today with the kit, but looked like it was the standard kit (because it was an oldy driving) also notice how many more curren and celica's are in my area now. THERES HEEAPS!

the SS-III run longer and are thiner, were as the SS-II one is shorter and fatter. (both front and rear)

The trademe ones I've seen around, the splitters and rear endcaps from that cheap trademe kit look like TRD but the front splitters on the TRD ones have holes in the front (air dams or wateva).

Ah what have you got a pic of them? TRD ones

Thats right I remember the SSIII ones now. .
Aint the TRD ones the same as the SSII? man i must seem like a noob.

[delusionz]

TRD kit:



notice the trademe kit has similar style to TRD in the rear and sides but not front:

[Rusty]

hmm I dont like the hieght on the side skirts, prefer SS-III ones


...
... ...

This post has been edited by Rusty: Jan 21, 2009 - 2:48 AM

[parriehunter]

Yea I saw it. pretty crazy. I dont like the way it looks tho. would be cool if it looked stock. ulitmate sleeper.

I like the height of the side skirts.

[delusionz]

Yeah it's quite ghetto, the boost gets you laid sticker, the podgy girl sitting in the passenger seat, the tacky blue seat covers, painted steering wheel, dodgily placed trd sticker and the path of the intake plumbing paints a nice picture of the owner.. lol

[parriehunter]

Haha. ghetto. it sure does paint a picture. she must be one lazy girl. couldn't be arsed moving out of the car for the photos. I think the seats are actually blue. but yea could look better.

[Rusty]

...

This post has been edited by Rusty: Jan 16, 2009 - 3:41 PM

[parriehunter]

Haha, that dude is angry. What a noob.

[Rusty]

MAN I CAN'T WAIT

I've still got about 4 weeks left till parts arrive.

[TRDGT4]

update if any?

[Rusty]

Of course...

ok so I contacted my supplier about my parts arriving from Japan, and I can expect them wait for it...... 24th December, so I get a merry xmas this year also got a guy who can paint my side skirts and install them (hes very good, so I can expect a top job ). and the splitters are easy install (aswell as the other things) then finishing it off with an trd oil change ...I cant wait


so we are looking about mid january finish

YEAH CELICA SS-II.V

[coneyre]

Fairplay Rusty, the car looks animal

[coneyre]

SSIII Front grille
53114-20101 SEA-FRIEGHT NZD $61.00 = USD $43

SS-III badge
75311-20480 SEA-FRIEGHT NZD $45.00 = USD $31.00
TRD strut brace

53607-ST001 NZD $506.00 = USD $352.00

GT-4 Rear strut brace
53605-20020 SEA-FRIEGHT – NZD $140.00 = USD $97.50

Projector Low Beam
RH: 81012-20100 OVERNIGHT & SEA-FREIGHT NZD $343.00 = USD $239.00
LH: 81014-20100 OVERNIGHT & SEA-FREIGHT NZD $343.00 = USD $239.00
Low beam Total NZD $686.00 =USD $478.00

Projector High Beam
RH: 81170-20050 SEA-FREIGHT NZD $185.00 = USD $129.00
LH: 81130-20050 SEA-FREIGHT NZD $185.00 = USD $129.00
High Beam Total NZD $370.00 = USD $258.00

Low & High Lights Total NZD $1056.00 = USD $736.00

SS-III Front Splitters
RH: 76851-20060-D0 SEA-FREIGHT NZD $365.00 = USD $254.00
LH: 76852-20050-D0 SEA-FREIGHT NZD $365.00 = USD $254.00

White TRD Cap
08298-SP077 NZD $54 = USD $37.60

Total NZD $2,596.50 = USD $1,809.60

those projectors are cheaper than cheap (a guy here sells them for USD $850, which is suppose to be very cheap) , but still quite alot to spend

I got up at 6am this morning just to look the the front strutbrace


and then later on I'll get the side skirts and rear splitters

Rusty I see you paid $1056 for the hight and low beam projetors. Is that the full price? does that include shipping?

[Rusty]

and thats in NZ dollars remember that. Yup thats all I paid for them as for shipping, it was FREE right to my door step and they arrived at my place in just 2 days after entering the country.

[kezza-q]

and thats in NZ dollars remember that. Yup thats all I paid for them as for shipping, it was FREE right to my door step and they arrived at my place in just 2 days after entering the country.

I looked into Projectors, CPA in Wellington offered me a set for $880 brand new, NZD, I thought that sounded like a lot at the time. Bad call...

[Rusty]

I'm still happy with the price (still alot cheaper than everybody else/most people) that must have been quite a while ago then? aussie dollar isn't doing to good with NZ dollar?


Anyway a little update, parts arrive in the country in about 5-6 days time, now I want the get them just after New Years, just so theres no chance of them getting lost in the post, because of Xmas

[kezza-q]

I'm still happy with the price (still alot cheaper than everybody else/most people) that must have been quite a while ago then? aussie dollar isn't doing to good with NZ dollar?

I lived in Wellington at the time, it was about 12-18 months ago. Sorry, I wasn't suggesting you got a bad deal, more a slap of my own forehead at missing out on a good one!

[Rusty]

oh right, yeah price must have gone up. I'm happy with the price (after hearing what the best deal my local toyota could do, NZ$1500 roughly)

[Rusty]

yeah rest of the body kit arrives this week

[Jaws4God]

car looking great!!

bump for update!

[Rusty]

well I was waiting for one of the rear strutbrace covers, however it will take about 10 ETA so... they are going to send all other parts down to me, should be arriving tomorrow (saturday or monday)
goes in just over a week to get skirts painted and installed, then I just have to fit the splitters, the body work is done

thanks for the interest

[Rusty]

so its monday...


wow what is that next to my oil filter?


A FREE mug, they gave me


lots of boxes (couple aren't in the pic)


new TRD gear knob and gearstick boot installed, feels very nice, yup that mug fits


got one cover, and is now installed


just waiting on the second, should arrive pretty soon

This post has been edited by Rusty: Jan 12, 2009 - 1:10 PM

[Rusty]

sorry for what is it now? triple post. but the second strutbrace cover arrived today

and going in shorty for paint and install of the side skirts.

[delusionz]

It says finished mid-Jan, but believe me, it's never finished.. haha

[TRDGT4]

looking good there mate bet you can't wait to have the kit on

[Rusty]

yeah I know what you mean guys, just want to get my licence done first (finally getting round to doing my full) so will go in a about 2weeks time but I do have some crappy cellfone pics I might throw on just to keep you guys happy

EDIT: here are the pics






This post has been edited by Rusty: Jan 20, 2009 - 1:08 PM

[coneyre]

Haha love the use of your shoes rusty, you kiwis can be very inovative.

Any update??

[MercuryFree]

Are you getting a strut brace cover as well as the mount covers?

[Rusty]

Are you getting a strut brace cover as well as the mount covers?

??? I have both top covers (the moulds that go round the trim and around the brace)

Haha love the use of your shoes rusty, you kiwis can be very inovative.

lol thanks, just had to step back and enjoy it

Any update??

none at the moment, waiting on another part coming from the USA, opps did I forget to tell you guys
goes in next week maybe monday/Tuesday??

[MercuryFree]

Are you getting a strut brace cover as well as the mount covers?

??? I have both top covers (the moulds that go round the trim and around the brace)

This thing

[delusionz]

Are you getting a strut brace cover as well as the mount covers?

??? I have both top covers (the moulds that go round the trim and around the brace)

This thing

that ur undies?

[MercuryFree]

Are you getting a strut brace cover as well as the mount covers?

??? I have both top covers (the moulds that go round the trim and around the brace)

This thing

that ur undies?

lol No it's an inside out jacket

[Rusty]

makes the strutbrace beefier

[MercuryFree]

makes the strutbrace beefier

I imagine it's there to stop things scratching your several hundred dollar peice of metal

[Rusty]

yeah that might come later on in the year...
anyway

waiting on another part coming from the USA

here is the part which should be arriving soon


clear projector style indicators (just like whatthe's)

This post has been edited by Rusty: Jan 28, 2009 - 1:12 PM

[MercuryFree]

So is there a noticeable difference in handling performance between the stock strut brace and the TRD one?

[Rusty]

umm yes and no, i've heard it works best at high speed cornering, if you take out & check your stock strutbrace you can see how much movement it has (which cant be good) if it doesn't do anything it still looks like it adds 20HP

its kind of hard for me to tell at the moment since i dont have my celica --- yup about 2weeks

This post has been edited by Rusty: Feb 9, 2009 - 12:16 AM

[delusionz]

You should be able to feel extra G's on your body from a stiffer setup... It looks like it would be very effective

[Rusty]

I can feel something (feels nice going round corners now ) but I dont know if its the lowering springs??

[MercuryFree]

I can feel something (feels nice going round corners now ) but I dont know if its the lowering springs??

Heh, this is why the step by step modding method is best; your butt dyno gets to feel amazed more times

[Rusty]

I did, I put the springs in then months later I went to aussie (didn't drive my celica for about a week) and when I got back my brothers had already put the trd strutbrace in.

This post has been edited by Rusty: Feb 9, 2009 - 1:17 PM

[Rusty]

Update: if no one had read or figured out yet my car is in the shop getting the kit fitted and painted etc (I'm going to the shop tomorrow to see how they are going)
also my lights have arrived today they look real nice, cant wait to put them on, they also came with bulbs which saves me some time and money.

[Rusty]

I pick up the celica later today and will post pictures soon , had I look it a couple of days ago without the skirts on(had just been painted) looks real good and very low





(sorry for the triple post)

[TRDGT4]

I pick up the celica later today and will post pictures soon , had I look it a couple of days ago without the skirts on(had just been painted) looks real good and very low
(sorry for the triple post)

so where are these pics??

[Rusty]

aawww do I have too??? whether isn't that great........ i've just put those front indicators, in the end I had to get new bulbs as the US bulbs that came with it, had 2 filaments in them, where as ours only has 1. odd but they look & work very nice compared to the old ones.
a couple of my mates have seen it and the reckon it almost is a widebody on it, due to the angle of the sideskirts etc

[Rusty]

so where are these pics??

ok I have loads of pictures, but i've ran out of internet, so uploading will be slow, you'll have to wait a while sorry... ok im not that mean heres a couple to tie you over (theres are much better than the one I texted you TRDGT4 )



the first pic I took after getting her home, notice the indicators


today we had better weather... so I gave her a little clean up









now notice them now





This post has been edited by Rusty: Feb 27, 2009 - 12:42 AM

[Random_Stranger]

looks real good

[ej8ferio702]

OMG! that was a pretty impressive list of parts you got there...and for it all to be OEM one heck of good buy for you, the car turned out really well, i love the color and the stance! good job!

[delusionz]

You debadged the rear?

[whatthe]

Very very very nice !!

[Rusty]

You debadged the rear?

came like that,i was thinking of putting the SS-II badge back there but decided to put it at the front


yeah I really love that stance in that last picture


thanks guys for the great comments keep them coming

[Rusty]

another update: oil change and heatwrap




I can feel a big difference in engine bay temperature

[delusionz]

Looks good man, engine got some extra juice now? your temp gauge go down or not really?

wheres your 2000 twin cam 16 gone?

[Rusty]

Looks good man, engine got some extra juice now? your temp gauge go down or not really?

wheres your 2000 twin cam 16 gone?

I want to say it has more go-go but I don't know, but one thing for sure is that you can actually touch the extractors after going for a good run, I didn't notice the temp guage went down

I still got the badge, im just back to cleaning, got some autogel/polish stuff to hep bring up the shine, or I have metallic paint, which we used on my brothers rocket cover on his e30 BMW turned out real nice, so I dunno, will put the badge back on soon till then it sits up on my bedside table

[delusionz]

Well if your engine bay is cooler then your intake should be cooler, perhaps you'll notice it more at night.

I removed the heat shield from the SS-III too so the heat was also absorbed by the bonnet instead of being kept in, Probably wont do it on the GT-Four so crap doesn't drop through onto the engine.

[Rusty]

Well if your engine bay is cooler then your intake should be cooler, perhaps you'll notice it more at night.

I removed the heat shield from the SS-III too so the heat was also absorbed by the bonnet instead of being kept in, Probably wont do it on the GT-Four so crap doesn't drop through onto the engine.

yeah I think I can notice a bit more pickup at night time, i'll properly get more improvement with my cold airbox I plan to do one day lol

yeah true you look after that GT-Four


another couple of pics while im here








This post has been edited by Rusty: Mar 8, 2009 - 12:10 AM

[delusionz]

Beautiful. You keeping that rear wing? Hopefully a red GT4 or SS-III spoiler will come up, or even a two post wing and you could get the dimensions of the riser blocks and make it with fibreglass. Two post wings have different mounting holes so it will have to be professionally filled and drilled.

[whatthe]

too much porn for me to handle man. I LOVE IT, its so shiny and clean. You planning on getting raiser blocks?
ps. Need spacers too the offset on the wheels are whats ruining it imo.

This post has been edited by whatthe: Mar 8, 2009 - 4:59 AM

[Rusty]

i dunno I like my wing, I dont really want a SS-III wing because its not a SS-III, since its a SS-II

and yup wheels are next on the list, once I can kind some nice ones, except I cant find any I like/suit it

so start giving me ideas for wheels 16" or 17" nothing bigger than 38 offset (I think)...hmm maybe 17" by 7" ???

post up some pics so I have some ideas

too much porn for me to handle man

lucky your celica's white lol

the bodyshop put so much detail onto the sideskirts, it even follows the front wheel well plastic's the little back plastic bit that holds the wheel well cover in behind the front wheels

This post has been edited by Rusty: Mar 9, 2009 - 12:28 AM

[ZGear]

DAMN! Lookin good.

[malpaso]

Seeing this thread it reminds me my journey from stock look to SS-III look . It looks really good. Amazing work... really, really

[Sinyk]

Your car looks great so please don't take this the wrong way, but is your driver side (RHD from the looks of it) front splitter mounted a bit high towards the middle?

[Rusty]

Your car looks great so please don't take this the wrong way, but is your driver side (RHD from the looks of it) front splitter mounted a bit high towards the middle?

lol so it does.. i'll go check the real thing... lol you are right has been fixed

thanks malpaso & everyone else, I'm very impressed with it

This post has been edited by Rusty: Oct 14, 2009 - 8:11 PM

[Rusty]

does anyone have a picture of the air temperature thingy that goes into the stock airbox, i might be able to get my hands on one, but the person doesn't know what it is or what it looks like.

[MercuryFree]

does anyone have a picture of the air temperature thingy that goes into the stock airbox, i might be able to get my hands on one, but the person doesn't know what it is or what it looks like.

I'll take one in the morning if nobody else supplies one before then, can't get my tripod in there with both cars in lol.