[update 10/18/2015] shigexile's Preface SS-Four |
[update 10/18/2015] shigexile's Preface SS-Four |
Feb 11, 2009 - 12:30 AM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
First i wanna say thank you to Martin (Malpaso) for his support. I had plans of doing this before but never had the funding and a problem with the seller in UK for a long time. And then Martin completed his SS-Four bumper and by looking at his pictures, it solved all the probems i initially had. Thank you Martin, you the man!
So i finally got the bumper from UK after many complaining and off i go to the body shop where i used to work during the summer I got paint and body stuff for a cheap price since i was their best prep guy they had For some reason, the grill didn't lineup perfectly... but not noticeable The things i still need to do (exterior wise): 1. Paint the bumper "teeth" back to black 2. Paint my UK splitters silver 3. Exchange the high beams seal because i "accidentally" painted over them 4. Put the rear ss-III splitters on after paint 5. Getting my rims in about a month or so (and tires) Do you think i should paint the bumper "teeth" back to black? I'm kinda getting used to it being painted... C&C welcomed This post has been edited by Shigexile: Oct 18, 2015 - 12:54 AM -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Feb 11, 2009 - 1:03 AM |
|
Enthusiast Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) |
Gorgeous , is that a stock celica colour? it looks amazing, ss-four all the way !! Your photography skills are amazing too !! The teeth i dont know, i think it will look good either way, tho i do like your foggies yellow, gives it a massive jdm feel. What rims are you planning on going for?
This post has been edited by whatthe: Dec 7, 2009 - 9:10 AM -------------------- |
Feb 11, 2009 - 1:13 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
That looks killer, I always wondered when somebody would do it with the preface. Why don't you get the teeth covers. It'll look much cleaner. what about putting the little rectangular vents towards the bottom of the front grill in between the mouth and the grill. Good job though, much props
This post has been edited by trdproven: Feb 11, 2009 - 1:15 AM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Feb 11, 2009 - 1:43 AM |
|
Enthusiast Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
that looks great.. i like how it still maintains the curvy elements of the celica, not as aggressive as the gt-four but looks more serious just with a modest face. i'd keep the front splitters black..
-------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
Feb 11, 2009 - 2:35 AM |
|
Enthusiast Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) |
Yeh keep the eurou splitters black, I like how you relocated the license pate. Did you do some modding on the front bumper too the area along the bumper repeaters to where the stock license plate seems alot more flatened...
This post has been edited by whatthe: Feb 11, 2009 - 2:54 AM -------------------- |
Feb 11, 2009 - 2:53 AM |
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
damn that hella sexy.. smily face with an angry look
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
Feb 11, 2009 - 5:09 AM |
|
Enthusiast Joined Mar 20, '07 From Bakersfield, CA Currently Offline Reputation: 10 (100%) |
That is sexy as hell! I see another unique master like Malpaso here! That is so damn sexy! Only addition I can think of is making maybe a custom grill and taking out those middle pegs? But even with, it looks really good. I am really liking what I see.
Nevermind I see it is already pretty much done! I love it! This post has been edited by Random_Stranger: Feb 11, 2009 - 5:11 AM -------------------- 91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
|
Feb 11, 2009 - 5:10 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
Wow... I must say that is amazing work. I'm glad I had chance to help. It looks so different! And you are right it looks good as it is. In this picture looks simply unbelievable:
Definitely agree with painting those Euro splitters silver. But I'm not sure about "teeth". It looks really good this way... btw.: what about clear front turns and fender lights? (sorry I do not know how you call those outline amber lights in US ) -------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Feb 11, 2009 - 5:28 AM |
|
Enthusiast Joined May 25, '06 From Hong Kong Currently Offline Reputation: 256 (100%) |
Paint the fender as well...
-------------------- |
Feb 11, 2009 - 7:05 AM |
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
looks really nice, I think I side with Malpaso on the leaving the "teeth" silver.
bumper to fender needs to be blended, looks like the silver shades are off. |
Feb 11, 2009 - 7:06 AM |
|
Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
Looks great !
I'm waiting for better weather to have something like this done to my celi. Excellent work. -------------------- |
Feb 11, 2009 - 1:26 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
Thank you everyone for such nice comments
whatthe: Yeah, its the stock silver. I did clay bar my car prior to taking these pictures. Plus the lights in the garage brings out a little blue tint to it. And about the rims I am getting a set of ADVAN RCII 17x7.5J +35 in silver. The flatened out bumper in the front is explained below trdproven: The rectangular holes was the main part of the st204 bumper that was throwing off the alignment so that is why i had to eliminate that part. Actullay trdproven, i used your picture to make a photoshop image of this concept lol thanks, you had the UK splitters with preface, side skirt, 17in rims and the exact angle i was looking for. malpaso: i couldn't of done it without you! The front turn signals, i want to keep them amber so it will look more stock (plus finding clear bumper lights are hard for the preface celica) but i might consider the fender lights vincent_doggy & playr158: Yeah i have like 3 to 4 shades of silver on my car right now as well as 2 different vin numbers BUT i am planning to go BLACK or a LEXUS SILVER in couple years so till then this will do This post has been edited by Shigexile: Feb 11, 2009 - 1:38 PM -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Feb 11, 2009 - 1:40 PM |
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
nice work. Who need body kits these days ? Keep it up
-------------------- I will return one day. |
Feb 11, 2009 - 1:43 PM |
|
Moderator Joined Oct 13, '06 From UK Currently Offline Reputation: 6 (100%) |
Woah Shig, that looks amazing!
You've done a great job, i love it! will look even better with the painted splitters -------------------- |
Feb 11, 2009 - 2:18 PM |
|
Enthusiast Joined Oct 2, '07 From Manitoba, Canada Currently Offline Reputation: 6 (100%) |
those wheels are super hot
|
Feb 11, 2009 - 3:22 PM |
|
Enthusiast Joined Apr 15, '07 From san antonio tx. Currently Offline Reputation: 12 (100%) |
Sick job I love the bumper! Car looks good cant wait to see it with rims!
-------------------- Sorry, no animated sigs allowed.
|
Feb 11, 2009 - 4:37 PM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
Shig, you made my car look good, why couldn't you photoshop it into real life. JJ. Im gonna use that pic and tell my friends thats my car now. haha I was about to say those rims look like mine until i looked at the background. But indeed the grill and the hood makes a huge difference - changes the look entirely, you put the preface bumper to good use.
This post has been edited by trdproven: Feb 11, 2009 - 4:41 PM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Feb 11, 2009 - 11:02 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
nice work. Who need body kits these days ? Keep it up i know right lol. Good thing i didn't invest in a body kit. This is so much sweeter and unique. Woah Shig, that looks amazing! You've done a great job, i love it! will look even better with the painted splitters Thanks luke! Yeah i think i should paint the splitters too but there are some ppl saying to keep it black. I'm considering both right now. We'll see we'll see... leaning towards painting them like you said those wheels are super hot Can't go wrong with ADVANS Sick job I love the bumper! Car looks good cant wait to see it with rims! Me neither Shig, you made my car look good, why couldn't you photoshop it into real life. JJ. Im gonna use that pic and tell my friends thats my car now. haha I was about to say those rims look like mine until i looked at the background. But indeed the grill and the hood makes a huge difference - changes the look entirely, you put the preface bumper to good use. Your car is already really great One of cleanest ones out there. There was something about it that attracted me to your car. -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Feb 12, 2009 - 2:18 AM |
|
Enthusiast Joined Jul 7, '06 From Los Alamos, NM Currently Offline Reputation: 1 (100%) |
you know at first i didnt know what to expect but my god, this looks amazing!
-------------------- 2015 Subaru WRX. World Rally Blue/Black
2001 Honda S2000. Spa Yellow/Black |
Feb 12, 2009 - 6:18 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I say paint the splitters shig because its not like its a lip they are seperated, plus when I painted mine because I ran it black for a lil bit, it looked more better, it becomes part of the car.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Feb 12, 2009 - 6:07 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
yeah, i decided to paint them because like you see in the picture, you can't see them enough to notice them. If it was silver then at least you will notice that something is there...
-------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Feb 12, 2009 - 7:00 PM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
looks good man!
-------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Feb 16, 2009 - 5:34 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
looks good man! Thanks manny, you helped me out with the wiring of the projectors remember? -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Feb 17, 2009 - 7:54 PM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
Shig how did you do your wiring? How I did mine was pretty clean, I took a 9006 heavy duty harness and merged it with an H4 (pretty much the same as H1). This way I created an OEM looking 9006 to H1 Harness adapter.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Feb 18, 2009 - 10:16 AM |
|
Enthusiast Joined Jun 2, '08 From Fort Worth, Texas Currently Offline Reputation: 9 (100%) |
i love it, looks awesome.
-------------------- |
Feb 18, 2009 - 7:55 PM |
|
Enthusiast Joined May 23, '06 Currently Offline Reputation: 0 (0%) |
Get the clear high beams when you can bro, it will pull the whole car together.
Still looks awesome and unique either way though. |
Feb 18, 2009 - 8:27 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
Shig how did you do your wiring? How I did mine was pretty clean, I took a 9006 heavy duty harness and merged it with an H4 (pretty much the same as H1). This way I created an OEM looking 9006 to H1 Harness adapter. are you talking about the HIDs? I had Culapable's HID GB on prior to having the projectors and when i put the projectors on i just bought just the bulbs from him. The bulbs and harness mated perfectly so it was a clean swap. i love it, looks awesome. Hehe thank you Get the clear high beams when you can bro, it will pull the whole car together. Still looks awesome and unique either way though. Oh, but I DO have the clear highs on... Maybe it looks like i don't because of the glare... -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Feb 18, 2009 - 9:42 PM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I'm pretty your stock harness is 9006, well just curious.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Feb 18, 2009 - 10:19 PM |
|
Enthusiast Joined Mar 20, '07 From Bakersfield, CA Currently Offline Reputation: 10 (100%) |
I can't wait for those HI Res photos! MODS HURRY UP AND APPROVE! MY wall is waiting for them!!!!
Malpaso, if you read this, is there any chance you can post more of yours as well? I am not going to copy you guys, but I LOVE them and want those on my wall, Well, in Malpaso's case, MORE on my wall. -------------------- 91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
|
Feb 19, 2009 - 6:24 PM |
|
Enthusiast Joined Oct 12, '05 From Texas Currently Offline Reputation: 59 (100%) |
Looking awesome -- i really like it.
-------------------- Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor |
Feb 21, 2009 - 11:49 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
... Malpaso, if you read this, is there any chance you can post more of yours as well? I am not going to copy you guys, but I LOVE them and want those on my wall, Well, in Malpaso's case, MORE on my wall. Do you really need more than is written here??? This post has been edited by malpaso: Feb 21, 2009 - 11:49 AM -------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Feb 21, 2009 - 12:51 PM |
|
Enthusiast Joined Mar 20, '07 From Bakersfield, CA Currently Offline Reputation: 10 (100%) |
... Malpaso, if you read this, is there any chance you can post more of yours as well? I am not going to copy you guys, but I LOVE them and want those on my wall, Well, in Malpaso's case, MORE on my wall. Do you really need more than is written here??? Man, I just love your car. The more the better. I got people lovin' your ride when they walk in my room and see it on my wall. And I am still waiting on those High Res Shigexile's photos! They are taking for-ev-errrrrrrr....... :-( This post has been edited by Random_Stranger: Feb 21, 2009 - 12:53 PM -------------------- 91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
|
Feb 22, 2009 - 8:50 PM |
|
Enthusiast Joined Dec 14, '08 From La La Land.. Currently Offline Reputation: 6 (100%) |
great job so far! can't wait to see the final results!
-------------------- -----------
Stay Conscious and Aware - Do not decide who to trust, decide which ideas to trust. |
Feb 24, 2009 - 5:57 AM |
|
Enthusiast Joined Feb 6, '08 From Oregon Currently Offline Reputation: 8 (100%) |
I am loving it!!!! I have been waiting untill i win the lotto to spend all sorts of money in my celi and THIS was on the list! I am SO SO SO SO SO jealous!!! It looks really amazing, you did a GREAT job with it, you should be very proud
-------------------- 1 JL 1,000/1v2
2 JL 12" W6v2 2 Focal 6.5 component 165a1 Kenwood DDX512 head unit Running 142.6db with the back seat up:) |
Mar 26, 2009 - 6:53 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
finally had time to paint my rear SS3's
I ordered 199 paint online sanded down original paint, then primer and paint clear coat and baking stage at least 3-4 layers of clear coat but the reflection was sharp enough you can see the reflection of the heater, good enough for me due to the bolts that hold these in the rear snapped on me, i used double sided automotive tape. taking off the old double sided tape was a hassle but finally got it off from the rear I need to do something about the duck tail... its not a perfect fit so its lifting up on some parts... double sided tape or epoxy i guess The color was a perfect match for my rear bumper but not so much with the rear fenders. As some of you may know, i have a total of 6 different celica's body parts on my car so i have about 4 different shades of silver. But don't worry, i will be going lexus silver or black in the future so until then, this will have to do. -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Mar 27, 2009 - 3:23 AM |
|
Moderator Joined Oct 13, '06 From UK Currently Offline Reputation: 6 (100%) |
Great job Shig
-------------------- |
Mar 27, 2009 - 6:36 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
Just sell me your exhaust you fool. lol.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Mar 27, 2009 - 7:01 AM |
|
Enthusiast Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) |
Looking really really good !! Any pic of rear side shot?
This post has been edited by whatthe: Mar 27, 2009 - 7:01 AM -------------------- |
Mar 28, 2009 - 4:18 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
Great job Shig thank you! Just sell me your exhaust you fool. lol. all the way to guam? lol Looking really really good !! Any pic of rear side shot? I'm starting to miss the spoiler... I might go back to the EURO block spoiler... we'll see we'll see they both have pros and cons pardon my dirty celica, been cold these days and gloomy out to wash her up -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Mar 29, 2009 - 2:34 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
wow... this shot is amazing! -------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Apr 21, 2009 - 12:13 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
^ really? haha thanks, its just a picture i took because whatthe asked me to
TA-DA! Not as light as i thought but i know they are extremely strong rims. RC stand for Rally Competition -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Apr 21, 2009 - 12:28 PM |
|
Enthusiast Joined Oct 10, '08 From sweet home, OR Currently Offline Reputation: 3 (100%) |
sweet.
-------------------- |
Apr 21, 2009 - 1:40 PM |
|
Enthusiast Joined Mar 20, '07 From Bakersfield, CA Currently Offline Reputation: 10 (100%) |
OH it's lookin' gooooooooooooood. :Drool:
-------------------- 91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
|
Apr 22, 2009 - 9:04 PM |
|
Enthusiast Joined Feb 22, '07 From norcal bay area Currently Offline Reputation: 4 (100%) |
First i wanna say thank you to Martin (Malpaso) for his support. I had plans of doing this before but never had the funding and a problem with the seller in UK for a long time. And then Martin completed his SS-Four bumper and by looking at his pictures, it solved all the probems i initially had. Thank you Martin, you the man! So i finally got the bumper from UK after many complaining and off i go to the body shop where i used to work during the summer I got paint and body stuff for a cheap price since i was their best prep guy they had For some reason, the grill didn't lineup perfectly... but not noticeable The things i still need to do (exterior wise): 1. Paint the bumper "teeth" back to black 2. Paint my UK splitters silver 3. Exchange the high beams seal because i "accidentally" painted over them 4. Put the rear ss-III splitters on after paint 5. Getting my rims in about a month or so (and tires) Do you think i should paint the bumper "teeth" back to black? I'm kinda getting used to it being painted... C&C welcomed wow dat looks fockin nice.....nice job -------------------- of all da things i lost.... i miss my mind da most
|
Sep 12, 2009 - 11:51 PM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
I just now found this thread... I have no idea where I have been. Car's looking great! Keep up the good work.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Oct 27, 2009 - 11:43 AM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
when the hell did this happen?
-------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Oct 27, 2009 - 1:36 PM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
And why those amazing pictures were not in calendar submissions?
-------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Oct 27, 2009 - 2:28 PM |
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
when the hell did this happen? Feb. 11, 2009 For some reason it looks like a Badger to me needs a front lip -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
Oct 27, 2009 - 4:03 PM |
|
Enthusiast Joined Aug 6, '09 From Bergen County,NJ Currently Offline Reputation: 10 (100%) |
The front end reminds me of the 7g so much. I really dont like the Euro Splitters but hell I think they would look great on your car, complete the look.
Either way looks great, I wanna try this out -------------------- 1996 Toyota Celica ST 25th Anni. Edition #461
|
Oct 27, 2009 - 4:05 PM |
|
Enthusiast Joined Mar 20, '07 From Bakersfield, CA Currently Offline Reputation: 10 (100%) |
Ay Shig! Why didn't you put these up for the Calendar? Those shots are by far one of the most amazing shots I have ever seen.
-------------------- 91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
|
Oct 27, 2009 - 4:10 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
I just now found this thread... I have no idea where I have been. Car's looking great! Keep up the good work. when the hell did this happen? Early this year And why those amazing pictures were not in calendar submissions? Because i don't think its good enough to be in the 6gc calender. There are many more other member's ride that are calender worthy. when the hell did this happen? Feb. 11, 2009 For some reason it looks like a Badger to me needs a front lip A badger? gee thanks, i don't know if i should be hurt by you saying that or just feel insulted and deal with it. Yeah, other people suggested a lip too but it didn't look clean with the current choice of lip. My original plan was with one on but dropped the idea since the prototype image on photoshop. I currently have euro front splitters on now and still need to paint them and see if i like them like that, and am in the process of photoshopping other front lips onto the car. but sadly, don't have the flexibility of money now. Just bought seats for the driver side not too long ago and spending money on my girl's 7gen to fix it. Ay Shig! Why didn't you put these up for the Calendar? Those shots are by far one of the most amazing shots I have ever seen. thanks! The front end reminds me of the 7g so much. I really dont like the Euro Splitters but hell I think they would look great on your car, complete the look. Either way looks great, I wanna try this out yeah, they're on there but its black now so you can't see them with the shadows This post has been edited by Shigexile: Oct 27, 2009 - 10:31 PM -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Oct 28, 2009 - 12:57 AM |
|
Enthusiast Joined Nov 6, '07 From seattle Currently Offline Reputation: 4 (100%) |
I don't know if anyone responded about this already but instead of painting it black Toyota actually has inserts that goes into the teeth. Thats why one of my teeth is silver is because i found out there were covers on them. I've been meaning to take pictures of it. ( don't know if anyone has already done it yet though)
-------------------- |
Oct 28, 2009 - 4:37 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I don't know if anyone responded about this already but instead of painting it black Toyota actually has inserts that goes into the teeth. Thats why one of my teeth is silver is because i found out there were covers on them. I've been meaning to take pictures of it. ( don't know if anyone has already done it yet though) yea they are just covers, regular toyota part number. But shig you need to find the rare magic or euro lip for the preface and then BALLLAAAA! -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Oct 28, 2009 - 2:08 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
yeah i'm aware about the inserts for the teeths, someone mentioned them to me, but i decided to keep them silver for NOW. (still need to toss my options around)
i already have a photoshop version of the EUROU lip on the car. As of right now, i am 95% sure i am getting one, or try to get one. One concern is that it makes it look more like a genuine st205 and less the SS3/Gt-Four hybrid version hence loosing the "uniqueness". They look so similar that even members on here wont notice its a GT-III (my version of ss-four) conversion without someone telling them so. as of the aeromajic, it was my first choice back last year when getting all the parts together. I didn't like the look, i thought i would but it just didn't click for me. I also did c-one lip too but that looked just oh so hideous. i'm in the process of putting those photoshop jpeg up on my blog. will post them here too after i get out of my lab This post has been edited by Shigexile: Oct 28, 2009 - 2:11 PM -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Oct 29, 2009 - 2:01 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
And why those amazing pictures were not in calendar submissions? Because i don't think its good enough to be in the 6gc calender. There are many more other member's ride that are calender worthy. I respect that but strongly disagree . You car and you pictures is perfect material for calendar... -------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Oct 29, 2009 - 6:54 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
shig the euro lip for the gt4 and the preface look different, much smaller. you'd be the first. the magic lip is big itll look more aggressive if you like it that way.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Oct 29, 2009 - 1:59 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
And why those amazing pictures were not in calendar submissions? Because i don't think its good enough to be in the 6gc calender. There are many more other member's ride that are calender worthy. I respect that but strongly disagree . You car and you pictures is perfect material for calendar... thanks martin, coming from you is an honor. Well, another reason is that i never took the time to take pictures with the rims on it. If i were to submit the pictures to the calender, it would have to be with the advans on shig the euro lip for the gt4 and the preface look different, much smaller. you'd be the first. the magic lip is big itll look more aggressive if you like it that way. here's a link to my page where i introduced the options for the front lip in a timeline starting from last year but i'll just run through the basics here: here is a picture with the magic lip. I liked at first but the more i look at it the more i hated it Then i decided to go with the EURO splitters: but after doing the conversion, i notice that the front splitters are still to high compared to the skirts and it doesn't show very much. And people will suggest me to get a lip even thou i have these on (meaning they can't see them! too small! need to paint!! or change them!) and before doing the conversion, i always liked the EUROU bodykit look so i photoshopped them with the gt-four hood I love the look and its my favorite out of the choices i have and i am almost certain that i will be buying this (or try to) lip anytime next year, but then again, compare it to the genuine gt-four they are almost identical. other issues are that if the lip will go too low compared to the skirts... in that case i don't mind getting the EUROU skirts either but... ... i'm lost -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Oct 29, 2009 - 4:34 PM |
|
Enthusiast Joined Aug 6, '09 From Bergen County,NJ Currently Offline Reputation: 10 (100%) |
I love the stance and the look of the 6g with the magic lip, I would defintaly get that to complete your look. But since you don't like it the last lip isn't a bad choice either.
Edit: Strange my post came out as a code This post has been edited by TiGZ461: Oct 29, 2009 - 4:36 PM -------------------- 1996 Toyota Celica ST 25th Anni. Edition #461
|
Oct 29, 2009 - 7:19 PM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I don't think so shig, the lip shouldnt go lower either higher or equal. In fact just to let you know the toms lip i have is ~1.5" higher than my sideskirts. Thats why i assume the euro lip will be either equal or higher. But even if it was lower, its best to have the front the lower part of the kit rather than the sideskirts as you mentiond.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Nov 2, 2009 - 8:44 PM |
|
Enthusiast Joined Oct 20, '07 From North Charleston, South Carolina Currently Offline Reputation: 4 (100%) |
veryvery nice. good work
|
Nov 2, 2009 - 9:58 PM |
|
Enthusiast Joined Nov 18, '08 From Idaho Currently Offline Reputation: 1 (100%) |
ahh i love that ss-four bumper!!!!!!!!!!!!!!!!!!!!!!!!!!!!! agh must have...
-------------------- A work in (extremely slow) progress
|
Nov 3, 2009 - 4:50 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
... i'm lost about lip... my personal option to go would be this: IMO this is great design combination! -------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Nov 3, 2009 - 6:56 PM |
|
Enthusiast Joined Nov 18, '08 From Idaho Currently Offline Reputation: 1 (100%) |
... i'm lost about lip... my personal option to go would be this: IMO this is great design combination! uh so thats exactly what i want my celica to look like someday... -------------------- A work in (extremely slow) progress
|
Dec 6, 2009 - 8:51 AM |
|
Enthusiast Joined Sep 23, '08 From Hawaii Currently Offline Reputation: 10 (100%) |
First i wanna say thank you to Martin (Malpaso) for his support. I had plans of doing this before but never had the funding and a problem with the seller in UK for a long time. And then Martin completed his SS-Four bumper and by looking at his pictures, it solved all the probems i initially had. Thank you Martin, you the man! So i finally got the bumper from UK after many complaining and off i go to the body shop where i used to work during the summer What did you use to mold the parts together? did you add any support on the back? |
Dec 6, 2009 - 10:14 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
Then i decided to go with the EURO splitters:
but after doing the conversion, i notice that the front splitters are still to high compared to the skirts and it doesn't show very much. And people will suggest me to get a lip even thou i have these on (meaning they can't see them! too small! need to paint!! or change them!) other issues are that if the lip will go too low compared to the skirts... in that case i don't mind getting the EUROU skirts either but... ... i'm lost ^^^ I love that old skool pic of my car haha. but see why i changed out my splitters? both types even? I needed a full lip solution. The splitters are never level with the skirts or to the front to the side and never complete. -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Dec 6, 2009 - 3:15 PM |
|
Enthusiast Joined Mar 20, '07 From Bakersfield, CA Currently Offline Reputation: 10 (100%) |
... i'm lost about lip... my personal option to go would be this: IMO this is great design combination! I 100% agree with Mal -------------------- 91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
|
Dec 7, 2009 - 5:54 AM |
|
Enthusiast Joined Aug 19, '09 From Sydney Currently Offline Reputation: 0 (0%) |
Looks great!
Clear indicators ? -------------------- |
Dec 7, 2009 - 11:14 AM |
|
Enthusiast Joined Oct 29, '04 From Hong Kong Currently Offline Reputation: 5 (100%) |
ss-four bumper very like ......malpaso long time no see you .... when will plan go to HK join our celica meeting ?
-------------------- |
Aug 28, 2010 - 10:11 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
this is what have happened since the last post.
Some things i had laying around for over a year and through out last year and this past few weekend, i have installed just about everything i had pilled up. 1. I finally got around to taking off the bumper and switching out my hi beam's rubber 2. Painted the euro front splitters to silver 3. Got center caps for my advans 4. Installed TRD steering wheel from an ae111 5. Installed TRD quick shift v.2 6. Visited my parents and friends in japan, came home with Laile Beatrush F/R strut towers 7. Finally got my seat rails which took forever, I put in the brixII seat only thing left is to wash my car... only one car wash this year This post has been edited by Shigexile: Aug 28, 2010 - 10:19 PM -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Aug 29, 2010 - 3:57 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
note: that st. wheel looks amazing! -------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Aug 29, 2010 - 4:11 AM |
|
Enthusiast Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) |
Im reallllllly jealous of your holding monster seat !!
-------------------- |
Aug 29, 2010 - 12:27 PM |
|
Enthusiast Joined Jun 18, '09 From Orlando Currently Offline Reputation: 8 (100%) |
Damn, fantastic-looking interior. Really nicely done.
-------------------- '97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE |
Aug 31, 2010 - 6:07 PM |
|
Enthusiast Joined Apr 23, '08 From Muskego,Wi Currently Offline Reputation: 8 (100%) |
its to bad you couldn't make the midwest meet. Either way that new parts look good!
-------------------- 2nd Gen 3s-gte.... It lives!
97celiman "92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM" |
Sep 4, 2010 - 12:05 AM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
note: that st. wheel looks amazing! Thanks Martin! The leather is a little worn out on the right side but its still in good shape. Im reallllllly jealous of your holding monster seat !! Lol, thanks but its a pain to get in and out of that seat. Damn, fantastic-looking interior. Really nicely done. Thanks man, i'm currently try to get all the interior panels skinned with cf without the polisher to get the matt-dry look. its to bad you couldn't make the midwest meet. Either way that new parts look good! Yeah, i wish i could have went but without the clutch behaving right, i couldn't go anywhere. I'm keeping my eye open for the next meet. -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Sep 5, 2010 - 8:21 AM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
HAWT.
love the steering wheel, and the seats! how much was the beatrush front bar? -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Sep 5, 2010 - 12:45 PM |
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
Nice Shig!
I can't wait to see the car again... We'll have to go out for a drink when I get home from school. Did you keep the TRD rears? I think that a profile shot is in order.... Get out there and wash the car! -------------------- ~bloodMoney
|
Oct 29, 2010 - 11:57 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
HAWT. love the steering wheel, and the seats! how much was the beatrush front bar? Got a deal because I directly went to their engineering facility and told them i'm bringing it back to america so for the front + rear i got them for just under $300. initial cost would have been in the $500 range since laile is the sister company of c-one. Nice Shig! I can't wait to see the car again... We'll have to go out for a drink when I get home from school. Did you keep the TRD rears? I think that a profile shot is in order.... Get out there and wash the car! I never had trd rears, they were ss-iii rears. I was gonna wash the car last week but i dont drive it anymore and the girl's car was in need of a major bath. yeah, call me up when you're in town. -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Oct 30, 2010 - 12:02 AM |
|
Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
My new wallpaper. GOODNESS that reflection looks amazing. Great progress man! I'm really loving the rims! One question, what paint did you use for the Euro splitters? I want to paint mine soon and I'm not sure what to use. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Oct 30, 2010 - 12:09 AM |
|
Enthusiast Joined Mar 10, '08 From Socal, OC Currently Offline Reputation: 7 (100%) |
i LOVE this celi. should paint it black, red or white though imo only cause im not a fan of silver haha
|
Oct 31, 2010 - 1:58 AM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
My new wallpaper. GOODNESS that reflection looks amazing. Great progress man! I'm really loving the rims! One question, what paint did you use for the Euro splitters? I want to paint mine soon and I'm not sure what to use. It feels good to know there is someone out there using my picture and car for their wallpaper, thank you. I used a spray can from automotivetouchup.com. They have the paint code for our cars. The paint is a little off do to my original pain faded with sun but results are pretty decent. i LOVE this celi. should paint it black, red or white though imo only cause im not a fan of silver haha Thanks! Yeah, a lot of my car buddies HATE silver with a passion. They say its not a sports car color. (Who said a celica is a sports car? ) Love black, it makes our car look so much better but they fade over time and swirl marks are so visible with black. I was thinking about repainting it black but then i would have to paint the door hinges, engine bay, and all the hard to get places that i won't be able to do myself. I want it to be a "complete" paint job (since i don't want the ghetto paintjob where only the outside is painted black and when you open the door all you see is silver...) White is nice if i had a full kit on and also white gets dirty easily. I'm not at a place where i can give frequent car washes to make her look sharp. Red? I have a friend that drives a red integra and he's always competing against me so i would try to stay away from red lol. Reason why i'm repainting the car silver: Even when the car is dirty. it looks clean. No extra paint needed for engine bay, door hinges, etc. I'm repainting it to a Lexus silver so it should SHINE. (yes all CAPS) This post has been edited by Shigexile: Oct 31, 2010 - 2:02 AM -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Oct 31, 2010 - 11:20 PM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
that is such a great pic.
-------------------- |
Nov 1, 2010 - 8:17 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
please, please, please post your picture in here
http://www.6gc.net/forums/index.php?showtopic=76559 I would like to see this beautiful car as Celica Of The Month once... -------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Nov 1, 2010 - 12:52 PM |
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
I posted that pic of both of our cars for this months COTM..... lol
-------------------- ~bloodMoney
|
Nov 2, 2010 - 4:25 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
I posted that pic of both of our cars for this months COTM..... lol I would not compare those two pictures . -------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
Nov 2, 2010 - 11:12 AM |
|
Enthusiast Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) |
love the car, gives me shivers
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
Jan 12, 2012 - 2:44 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
Haven't posted in months but the celica is at the hospital for the first time in 8 yrs of owning it.
It finally breaks something that I can't fix in the parking lot and this winter is not helping. Such a bad time to break but it did well for the 8 yrs owning it. Looking back at 2011, there are still numerous things i need to fix: 1. My carbon fiber wrap attempt was a FAIL. Need to re wrap it. 2. Ducktail spoiler won't stick to the hatch anymore. Thinking about just molding it on there but I still have the EURO spoiler block. Can't decide which one. 3. The fog light's wires caught on fire. Need to re wire it with thicker wires. 4. Still can't fix my horn. Just might buy an aftermarket one. 5. Not 6gc related but my 2002 GTS was totaled. Having a hard time finding a white exterior/black interior IS250 6spd in this area. Hope 2012 gets better from here on out. -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Jan 12, 2012 - 2:51 PM |
|
Enthusiast Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) |
You need this horn
-------------------- |
Jan 12, 2012 - 2:55 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
^ I'll take that into consideration
-------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Jan 12, 2012 - 2:58 PM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
The silver '02 that was at the meet is totaled? That sucks. What happened? Hopefully nobody was hurt. What's wrong with the 6th gen?
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Jan 13, 2012 - 3:18 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
My girl was driving across a street with no traffic lights, then a car came and hit the front passenger side causing her to spin around the way she came from.
Luckily she is safe, but the other driver had some neck injury. Her fault since she didn't yield but the guy was speeding. Also he never showed up in court so the ticket was lifted. That 7th gen have seen two major accidents in the 1.5 years owning it. Its probably possessed. Time to move on. As for the 204, its electric issues. The alt is done for, and most likely a short somewhere. Fixing the alt is easy but its the grounding issue that is too much work to find (especially with my work schedule) BTW, I'm thinking about taking some winter pictures of my car in downtown soon so if anyone in the area is interested in a photoshoot tell me. This post has been edited by Shigexile: Jan 13, 2012 - 3:23 PM -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Jan 13, 2012 - 9:36 PM |
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
Call me when you're ready
-------------------- ~bloodMoney
|
Jan 13, 2012 - 9:40 PM |
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
I'd be down. I can update you on all the new fsae stuff if you havent talked to Eugene
-------------------- |
Mar 29, 2012 - 11:05 PM |
|
Enthusiast Joined Apr 18, '06 From Calgary, Canada Currently Offline Reputation: 37 (100%) |
2. Ducktail spoiler won't stick to the hatch anymore. Thinking about just molding it on there but I still have the EURO spoiler block. Can't decide which one. Keep the ducktail - I've got a buyer for your EURO riser blocks. -------------------- |
Mar 30, 2012 - 3:42 AM |
|
Enthusiast Joined Nov 29, '10 From Lake Havasu City, AZ Currently Offline Reputation: 31 (100%) |
2. Ducktail spoiler won't stick to the hatch anymore. Thinking about just molding it on there but I still have the EURO spoiler block. Can't decide which one. Keep the ducktail - I've got a buyer for your EURO riser blocks. keep the euro blocks- ill buy your duckbill -------------------- 6gcHeroes:808hectortimmybatmandiegotigamak |
Mar 30, 2012 - 3:46 PM |
|
Enthusiast Joined May 23, '11 From The Netherlands Currently Offline Reputation: 0 (0%) |
|
May 17, 2012 - 4:57 PM |
|
Enthusiast Joined Jan 4, '12 From US Currently Offline Reputation: 6 (100%) |
What's that bumper?
-------------------- 1993 Celica GT Coupe - sold
1994 Celica GT Liftback |
May 18, 2012 - 2:17 AM |
|
Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
-------------------- No more replicas... This is evolution... This is SS-four :)
________[Featured Celica of 6gc.net @ 2010]_________ |
May 18, 2012 - 5:18 PM |
|
Enthusiast Joined Jan 4, '12 From US Currently Offline Reputation: 6 (100%) |
Is it just a GT-4 bumper grille cut and plastic welded onto a GT bumper?
-------------------- 1993 Celica GT Coupe - sold
1994 Celica GT Liftback |
May 18, 2012 - 7:23 PM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Is it just a GT-4 bumper grille cut and plastic welded onto a GT bumper? Correct -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Mar 4, 2013 - 7:21 PM |
|
Enthusiast Joined Oct 30, '03 From IL Currently Offline Reputation: 15 (100%) |
I love my Bride BrixII and all but I always wanted the stock Recaro SR3 ever since I first saw my neighbor's Gt-Four in Japan.
So I've been browsing ebay even after I got the Bride and FINALLY I scored these: And before anyone asks: No, I will not be selling my Bride seats.... I plan on keeping it as my office chair or connect it to my Logitech How awesome is that Hopefully these will arrive before the Midwest Meet. -------------------- PROJECT 6TH GEN
<FS: Things up for grabs> <Progress> |
Lo-Fi Version | Time is now: May 16th, 2024 - 5:59 PM |